The black M1280-BHC Condenser Hypercardioid Microphone from Audix is a miniaturized condenser microphone with a fully integrated pre-amp and detachable cable, and has complete immunity from RF interference caused by cell phones and GSM devices.The M1280-BHC is equipped with a hypercardioid capsule, has a very wide frequency response, and can be used in a wide variety of live, studio, and broadcast applications. It can be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.The M1280-BHC includes a 25′ mini-XLR to 3-pin XLR cable, hanging clip, a mic stand adapter, and an external foam windscreen.GeneralLightweight, small profileMiniaturized pre-amp circuitryNo external power adapter needed12mm gold vapor diaphragmImmune to RF interferenceExtremely low noise, high SPL handlingMade in the USAApplicationsOverhead mic for choir, group vocalAcoustic instrumentsAmbient room mikingSymphonic area mikingSpeech, presentation, podiumCymbals, percussionAcoustic guitarWhatsApp:+8615989288128, UNCUCO Radio / TV Studio Equipment 687471291429
Audix M1280-BHC SpecsMicrophoneForm FactorHanging / Stand/Boom MountSound FieldMonoCapsuleCondenserDiaphragm0.47″ / 12?mm Polar PatternHypercardioidOrientationEnd AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenFoam (Included)PerformanceFrequency Range40 Hz to 20 kHz Maximum SPL147 dB SPLImpedance150 OhmsSensitivity10 mV/Pa (1 kHz)Dynamic Range126 dBSignal-to-Noise Ratio73 dB Equivalent Noise Level21 dB A-WeightedConnectivityOutput Connectors (Analog)1 x TA3F 3-Pin (on Attached Cable)Cable Length25′ / 7.62?m (Straight)PowerOperating Voltage18 to 52 V (Phantom Power)PhysicalColorBlackMountingHanging, Mic Clip/Stand Adapter (Included)Construction MaterialBrassDimensions?: 0.47 x L: 2.52″ / ?: 12 x L: 64?mmWeight0.99?oz / 28?gPackaging InfoPackage Weight0.65 lbBox Dimensions (LxWxH)10.8 x 2.4 x 2.3″S