The QTC40 from Earthworks is a condenser microphone. This microphone is a member of Earthworks Quiet Time-Coherent series and is designed to accurately reproduce quiet audio signals with pristine detail and low noise. The wide dynamic range of strings, choirs, and orchestras are captured and reproduced with uncanny accuracy and detail. The pre Polarized omnidirectional capsule exhibits fast response to transient (peak) signals, enabling exceptional SPL handling and minimal distortion.The omnidirectional capsule is incapable of proximity effect and a wide, flat frequency response of 3 Hz to 40 kHz further maximizes detail. Overall, the QTC40 is a valued addition in high-definition recording and sound reinforcement applications that include choir, orchestra, and acoustic music capturing as well as speech and sound design.High Definition & DetailThe Quiet Time-Coherent microphone series from Earthworks is designed to reproduce quiet signals with uncanny accuracy and detail without noise. Perfect for 192 kHz resolution recording.Ultrawide Frequency ResponseThe QTC40 exhibits a frequency response of 3 Hz to 40 kHz resulting in impressively detailed signal reproduction.Fast Transient ResponseThe pre Polarized condenser capsule is capable of capturing signal rich in transient peaks without noise due to distortion.High SPL HandlingThe QTC40’s high SPL provides incredible headroom, which further minimizes noise due to peak distortion and excessively loud signals at close proximity.Omnidirectional Polar PatternThe omnidirectional Polar pattern provides rich, consistent detail at the off and direct sections of the capsule.WhatsApp:+8615989288128, UNCUCO Radio / TV Studio Equipment 827517109008
Earthworks QTC40 SpecsMicrophoneForm FactorStand/Boom MountSound FieldMonoCapsuleElectret Condenser Polar PatternOmnidirectionalOrientationEnd AddressHigh-Pass FilterNoneTone AdjustmentNoneIndicatorsNoneWindscreenNonePerformanceFrequency Range3 Hz to 40 kHz Maximum SPL140 dB SPLImpedance65 OhmsLoad Impedance600 OhmsSensitivity34 mV/PaEquivalent Noise Level20 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin (on Mic)PowerOperating Voltage24 to 48 VOperating Current Consumption10 mAPhysicalColorNickelMountingMic Clip/Stand Adapter (Included)Dimensions?: 0.86 x L: 9″ / ?: 21.84 x L: 228.6?mmWeight0.5?lb / 226.79?gPackaging InfoPackage Weight2.85 lbBox Dimensions (LxWxH)11.9 x 8.4 x 4.3″S