The Mackie ProFX12v3 is a 12-channel mixing console featuring seven Onyx microphone preamps with 60 dB of headroom and a built-in effects engine with 24 built-in FX, making it well suited for live sound, home recording, and content creators. The integrated 2×4 USB audio interface offers high-quality 24-bit / 192 kHz recording and playback with zero-latency monitoring.Channels 1-2 offer combo XLR-1/4″ mic/line connections and a Hi-Z switch (for guitar and bass), while channels 3-4 offer XLR or 1/4″ inputs. Channels 1-4 include inserts, and single-knob compression. Channels 5/6, 7/8, 9/10 offer two 1/4″ inputs, while channel 11/12 uses a 3.5mm stereo input. Channels 1-10 feature gain controls, a 3-band EQ, an aux (monitor) send, a dedicated FX send, pan, mute, and level faders. Engaging channel 11/12’s USB 3-4 switch will override the 3.5mm input and enable the USB return from a computer.?Each channel strip includes button selectors for Main L/R, Sub 1/2, and Solo (PFL). The master section offers dedicated faders for Main, Sub, and FX. Main output connectors include both XLR and 1/4″, while sub and control room outputs use 1/4″ connector. A dedicated 1/4″ TRS headphone output includes its own independent level control. Other features include an input / USB 1-2 blend control,?a dedicated FX output,?an FX level fader, and an FX mute, which can also be controlled via the 1/4″ footswitch input.FeaturesProfessional Sound QualityEquipped with 7 Onyx Mic Pres offering up to 60 dB of gain and ultralow noise performanceGigFX Effects Engine with 24 different FX options, from reverbs to delays and moreEssential Mixing Tools3-band EQ on all channelsChannels 5 to 10 feature mic inputs and stereo line inputs for?maximum versatilityHi-Z switches allows direct connection of guitars, basses, and?other instruments100 Hz low-cut filter and 48V phantom power on all mic channelsStereo 3.5mm input on channel 11/12Aux/Monitor output with dedicated per-channel send controlStereo Subgroup output bus with per-channel assignmentHeadphone output with separate level and blend controlInsert jack on channels 1¨C4Pre-Fader solo on all channelsFootswitch input for FX MuteSingle-knob compression helps keep your input levels in check?24-Bit / 192 kHz 2×4 USB Recording Interface2x4 USB I/O allows you to create two custom mixes on your computer to send back in to the mixerPerfect for live performance recording, music playback, live streaming, and moreLatency-Free MonitoringEasily blend between monitoring your computer¡¯s output and a direct feed from the mixerProfessional Production ContentPro Tools | First and Waveform OEM professional software and plugin packages includedThe DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and LimiterSignature Rugged DesignMackie built-like-a-tank designSolid steel chassis protects your investmentTough ABS side protection?
Mackie PROFX12V3 Specs: Mixer Number of Analog Input Channels 12Number of Mic Preamps 7 Analog Output Channels 2 x Stereo Master Output 1 x Stereo Control Room/Monitor Output 1 x Stereo Bus/Subgroup Output 1 x Mono Aux Send Output 1 x Mono FX Send Output 1 x Stereo Headphone Output Mix RoutingStereo Main MixStereo Aux Bus/SubgroupFadersNoneMetersMain Meter:2 x 12-Segment LEDMeter RangeMain Meter:-30 dB to +15 dB Plus Peak/ClipSignal Processing Gain/Trim Range-20 dB to +60 dB EQ3-Band EQ EQ Parameters Low: ¡À15 dB at 80 Hz Mid: ¡À15 dB at 2.5 kHz High: ¡À15 dB at 12 kHz FiltersHigh-Pass: 100 Hz, 18 dB/Octave Built-In Effects 24 x Effect (Type Unspecified)Digital AudioBit Depth 24-Bit Performance Frequency Response Mic Input to Output :20 Hz to 30 kHz +0/-1 dB (Unity Gain) Max Input Level+22 dB Output Level Main Output :+28 dBu at Max Gain All Other Output :+22 dBu at Max Gain I/O Impedance Mic Input:3.3 Kilohms Insert Return:10 Kilohms Line Input:¡Ý 20 Kilohms Headphone Output :25 Ohms Main Output :120 Ohms (Unbalanced) 240 Ohms (Balanced) CrosstalkAdjacent Inputs:-90 dB at 1 kHz Input to Output :-80 dB at 1 kHz Fader Off:-75 dB at 1 kHz Muted:-90 dB at 1 kHz CMRR70 dB at Max Gain (1 kHz, Mic In to Main Out) EIN-126 dBu at Max Gain (150-Ohm Input)Noise FloorAll Output s:-95 dBu (Master Level at -¡Þ, Channel Levels at -¡Þ) -80 dBu (Master Level at Unity, One Channel Level at Unity) THD+N Mic Input to Main Output :< 0.03% (+4 dBu) Connectivity Analog Inputs2 x Combo XLR-1/4" 3-Pin Balanced/Unbalanced Mic/Line/Hi-Z Input5 x XLR 3-Pin Balanced Mic Input5 x 1/4" TRS Balanced/Unbalanced Line Input (5 Stereo Pairs)1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Line Input (1 Stereo Pair)1 x 1/4" TRS Footswitch Input Analog Output s2 x XLR 3-Pin Balanced Stereo Main Output 2 x 1/4" TRS Balanced Stereo Main Output 2 x 1/4" TRS Balanced Stereo Control Room/Monitor Output (1 Stereo Pair)2 x 1/4" TRS Balanced Stereo Subgroup Output (1 Stereo Pair)2 x 1/4" TRS Balanced/Unbalanced Aux/Monitor Send1 x 1/4" TRS Unbalanced Stereo Headphone Output Phantom Power+48 V, Selectable On/Off (Applied to All Inputs)Digital I/ONoneMIDI I/ONoneUSB1 x USB Type-B (USB 2.0)USB I/O Capacity2 x Input / 4 x Output BluetoothNoneCompatibilityOS CompatibilitymacOSWindows PowerAC Input PowerUniversal:100 to 240 VAC, 50 / 60 Hz AC Power Connector1 x IEC Input Power Consumption 30 W Physical Rack Mountable No , Dimensions: 3.9 x 13 x 14.8" / 8.1 x 33 x 37.5?cm Weight: 7.9?lb / 3.6?kg Packaging Info Package Weight: 11.3 lb, Box Dimensions: (LxWxH)18.6 x 15.11 x 5.1" Contact UNCUCO WhatsApp: +8615989288128 Email:firstname.lastname@example.org