The nickel KM 183 NI Microphone from Neumann is an omnidirectional, pressure condenser microphone intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal. The KM 183 is powered via +48V phantom power. Its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 183’s omnidirectional Polar pattern provides a generous pick up area and is suitable for X,Y (with cardioid mic and baffle plate) stereo miking, ambiance miking or spot miking instruments such as piano, wind instruments organ and choir. The KM 183 handles sound pressure levels up to 140 dB allowing close miking of instruments high in transient (peak) level response.Omnidirectional Polar PatternThe omnidirectional Polar pattern offers a generous pick up area, suitable for room ambiance capture as well as spot miking on piano, organ, wind instruments and choir.KM 100 Based Output StageThe KM 183 features the same output stage electronics as the KM 100. Transformerless circuitry and quiet balanced output design ensure a clean, high gain output signal without any coloration.Compact Rugged ConstructionThe slim design and rugged construction allow easy microphone placement while remaining road worthy. +48 Volt Phantom PowerThe KM 183 is powered by +48V phantom power, and its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 183 handles sound pressure levels up to 140 dB, allowing close miking of instruments high in transient (peak) level response.WhatsApp:+8615989288128, UNCUCO Radio / TV Studio Equipment 615104084377
Neumann KM183NI SpecsMicrophoneOperating PrinciplePressure GradientCapsuleCondenser Polar PatternOmnidirectionalPerformanceFrequency Range20 Hz to 20 kHz Maximum SPL135 dB SPLImpedance50 OhmsLoad Impedance1000 OhmsSensitivity12 mV/Pa at 1 kHz into 1 KilohmsSignal-to-Noise Ratio69 dB CCIR81 dB A-WeightedEquivalent Noise Level25 dB CCIR13 dB A-WeightedTHD0.5% ConnectivityOutput Connectors (Analog)1 x XLR 3-PinPowerOperating Voltage48 V ¡À 4 VOperating Current Consumption3.2 mAPhysicalDimensions?: 0.87 x L: 4.21″ / ?: 22 x L: 107?mmWeight2.82?oz / 80?gS