E6 Fitting VideoDesigned for stereo recording, the sE Electronics sE8 Matched Pair gives you two sE8 microphones in one convenient package. The sE8 itself is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound as well as a detailed transient response. With two microphones matched specifically for consistency, you’ll be able to capture a clear and accurate stereo image. The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately. Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You’ll also note a switchable low-pass filter that rolls off low end at either 80 or 160 Hz at 6 dB per octave. To enhance durability¡ªand to reject electrical interference and noise¡ªthe sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they’re not in use.Key Features at a Glance3-micron, gold-sputtered diaphragm?Handcrafted, hand-tuned capsule?Precision electrode design for a linear, naturalistic responseBackplate design provides smooth, natural sound and consistent off-axis responseElectronic design provides low noise without the use of integrated circuitsTransformerless design for transparency and clarityClass-A circuitry for a high dynamic range and transient response without distortion-10 and -20 dB pads, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and moreLow-pass filters, selectable between 80 and 160 HzAll-metal chassis provides efficient rejection of electrical interference and noise?Includes two mic clips, each with a thread adapterIncludes two windscreensIncludes stereo bar for mounting microphones for stereo recordingIncludes a robust metal caseWhatsApp:+8615989288128, UNCUCO Radio / TV Studio Equipment 819032011225
sE Electronics SE8 SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorStand/Boom MountIntended Sound SourcesAcoustic Guitar, Piano, Drums, Percussion, Cymbals, Overhead, Instrument, Strings, Room AmbianceSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenser Polar PatternCardioidOrientationEnd AddressCircuitrySolid-StatePad-10 dB-20 dBHigh-Pass Filter80 Hz, 6 dB/Octave 160 Hz, 6 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenFoam (Included)PerformanceFrequency Range20 Hz to 20 kHz Maximum SPLCardioid: 139 dB SPL Peak (1 kHz, .5% THD)159 dB SPL (1 kHz, .5% THD, with Pad)Impedance110 OhmsLoad Impedance1 KilohmsSensitivity-32 dBVDynamic Range126 dB (without Pad)146 dB (with Pad)Signal-to-Noise Ratio81 dB Equivalent Noise Level13 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage48 V (Phantom Power)Operating Current Consumption2.7 mAPhysicalColorBlackMountingMic Clip/Stand Adapter (Included)Included CaseHard CaseIncluded FiltersNoneConstruction MaterialMetalDimensions?: 0.91 x L: 4.72″ / ?: 23 x L: 120?mmWeight4.97?oz / 141?gPackaging InfoPackage Weight4.3 lbBox Dimensions (LxWxH)13.9 x 8.55 x 4.5″S
