5000W Digital TV Transmitter
5000W (5000W, air-cooled, indoor type) UHF terrestrial digital TV broadcast transmitter consists of main (backup) exciter, switcher (optional), push, power distribution, power amplification (including power distribution, amplification, synthesis)

5000W Digital TV Transmitter

1. Overview
This 5000W (5000W, air-cooled, indoor type) UHF terrestrial digital TV broadcast transmitter consists of main (backup) exciter, switcher (optional), push, power distribution, power amplification (including power distribution, amplification, synthesis) , Power synthesis, detection, control display, power amplifier switching power supply, cooling and other functional units. It puts various functional units in different chassis to form a 19-inch standard cabinet, which has the advantages of simple structure and strong integrity.

The outer surface of the cabinet adopts electro-galvanized post-spray anti-corrosion technology, high-strength cold-rolled steel plate is processed by high-precision numerical control, and the overall structural performance is excellent.

2. Features

●The exciter uses digital technology to process signals, with high indicators, complete interfaces, and online software upgrades.

●The switcher (optional) dynamically detects and monitors the output of the exciter and alarm signal, which can be remotely controlled to switch, automatically switch or manually switch.

●The display control of the whole machine adopts a large 8-inch touch LCD screen as the display unit, and the display page is clear and clear. It is convenient and quick to check the system parameters and the status of the power amplifier unit. The display control of the power amplifier unit adopts LED as the status indicator, which is simple and clear. Set the working parameters and interface configuration of the transmitter through the control panel or remote monitoring interface. After power off or restart, the original setting state can be automatically restored.

●Using the coupling loop directional coupler to detect the forward and reverse power, with good directivity and high isolation.

●With automatic power control and automatic protection functions, when the transmitter has a serious failure (such as output overload, power amplifier overheating, overvoltage, overcurrent, excessive reflected power, etc.), or when the transmitter is damaged due to external reasons, the monitoring system It will automatically reduce the transmission power or cut off the transmitter’s RF output or shut down.

●Provide serial and TCP/IP communication interfaces, provide real-time monitoring and alarm functions. Monitoring content includes: equipment working status and parameter configuration, etc. When an abnormal situation occurs in the equipment, an alarm indication is given, and the monitoring and alarm can be controlled and inquired remotely. It is convenient for users to realize unattended remote monitoring and control.

●The power amplifier unit is composed of twelve 450W power amplifiers. Each 450W power amplifier uses four imported high-efficiency high-power super-linear field effect tubes BLF888D, which has anti-high standing wave ratio (40:1), anti-static, and high efficiency ( Doherty is greater than 40%), the advantage of good linearity. The input and output of the power amplifier tube adopts microstrip impedance transformation, imported high-frequency board material, small size, low loss, consistent performance, and easy to produce without debugging. Power distribution and synthesis use in-phase distribution and synthesis technology. The power distribution adopts microstrip technology, which has the advantages of good consistency and small size. The power synthesis adopts the patented technology of suspended strip line synthesis, four-channel input two-stage synthesis, which has the advantages of large power capacity, high isolation, and insertion loss less than 0.3dB.

●The power distribution and synthesis unit of the whole machine adopts in-phase distribution and synthesis technology. The power distribution adopts microstrip technology, which has the advantages of good consistency and small size. The power synthesis adopts the patented technology of high-power distributed parameter synthesis, twelve-channel input one-stage synthesis, which has the advantages of large power capacity, high isolation, and insertion loss less than 0.1dB. The high-power absorbing load and the large-volume fan can ensure that the transmitting system does not stop working in the case of a power amplifier module failure, which greatly reduces the risk of stopping the broadcast.

●The AC power input of the whole machine is equipped with a B1 arrester protection system imported from Phoenix, Germany, to avoid lightning damage.

●The control power system adopts imported high-reliability and high-efficiency switching power supply with power factor correction. Wide operating voltage range and high reliability.

●The power amplifier power system can adopt parallel redundant centralized power supply, and a N+1 system is formed by multiple independent switching power modules in parallel, which are mutual backups. If one is damaged, the normal operation of the system can be guaranteed. Adopt brand high-quality high-power 5000W switching power supply, with large margin, high efficiency, low ripple, anti-interference, and good electromagnetic compatibility. Whether the output of the switching power supply is controlled by the control display unit. Each switching power supply module interface is hot-swappable, easy to replace and maintain; comes with fan cooling; has over-voltage, over-current and over-temperature protection; LED displays working status and alarm signals; the input power supply system adopts high-efficiency AC three-phase 380V power supply.

●The power amplifier unit adopts forced air cooling. The use of large air volume centrifugal fan has a life of up to 100,000 hours, large air volume, noise below 60dB, and good cooling effect, which can ensure the normal operation of the transmitter.

5000W-450WX12-H2

3. Technical Details
3.1 Equipment performance meets the following standards

GB/T 28435-2012 Technical requirements and measurement methods for terrestrial digital TV broadcast transmitters

GB 20600-2006 Digital TV terrestrial broadcasting transmission system frame structure, channel coding and modulation

GB/T 28436-2012 Technical requirements and measurement methods for terrestrial digital TV broadcast exciters

GB/T 12572-2008 General requirements and measurement methods for parameters of radio transmitting equipment

GB 9159-2008 Safety requirements for radio transmitting equipment

GB/T 2829-2002 Periodic Inspection Attribute Sampling Procedure and Table

GB/T 14433-1993 Technical Regulations for Color Television Broadcasting Coverage Network

SJ/T 11574-2016 General Specification for Digital TV Terrestrial Broadcast Transmitter

SJ/T 10351-1993 General technical requirements for television transmitters

3.2 Technical Specifications

1. RF frequency range 470~860MHz

2. Output power 0～rated power continuously adjustable

3. Allowable deviation of output power ＜±0.5dB

4. Output power stability ＜±3%

5. Output impedance 50Ω

6. Residual wave in adjacent channel ＜ -45dB (optional bandpass filter)

7. The residual wave outside the adjacent channel <-67dB (optional bandpass filter)

8. Switching mode of main and standby exciters:

automatic/manual (when the main exciter equipment is damaged or there is no output)

9. RF input connector N-50K

10. RF output connector 1-5/8”or 3-1/8”Flange (optional)

11. Exciter input interface:

a) ASI input interface BNC (female) 50Ω

b) IP input interface RJ-45

12. Radio frequency monitoring interface BNC (female) 50Ω

13. Remote monitoring interface RS232/RS485 DB9 (male) or RJ45 Ethernet interface

14. Lightning protection The cabinet has a built-in lightning arrester.

15. Power supply voltage 3-phase AC380V/3-phase AC220V 50Hz/60Hz (optional)

16. Cooling method forced convection

17. Overall efficiency ≥20%

18. Channel bandwidth 6/8MHz (optional)

19. Power input level 0dBm

20. In-band fluctuation ±0.5Db

21. Shoulder better than 36dB

22. MER better than 32dB

23. (Optional) Digital TV standard:

1. National Terrestrial Digital Television Standard (DTMB): GB20600-2006

2. China Mobile Multimedia Broadcasting and Television (CMMB): GY/T220.1-2006

3. European standard for terrestrial digital TV standard: (DVB-TC (H)): ETS1300744

3.3 Physical Specifications

1. Chassis standard 19 inches 43U

2. Chassis size 850mm (width) × 2000 (height) mm × 1200 (depth) mm

3. The weight of the whole machine 450kg

4. Operating environment temperature -10℃～+50℃

5. Relative humidity ≤95%

6. Altitude ≤5000m

7. Atmospheric pressure 86kPa~106kPa

Payment Method

We accept online payments via paypal, credit and debit cards. We also accept western union, money gram and bank transfer.

To order goods online and pay them via paypal, credit and debit cards, simply add your selected items to your basket, and proceed to the checkout, where you will be guided through the payment process.

Payment via PayPal:

1. You have your PayPal account, then choose the PayPal to complete the payment directly

2. If you want to use the PayPal payment, but you don’t have one PayPal account, please register one first.

Note: Choose the PayPal payment, you can choose your country currency, we accept all the currency.

Payment via Debit and Credit Card:

1. You click MasterCard, Visa Credit Card, American Express, Discover payment directly, you will be redirected to the PayPal website, then choose the payment method again, and fill in your card information to complete the payment.

2. You click the PayPal&Credit, you will be redirected to the PayPal website, the one is PayPal payment, the other one is Pay with Debit or Credit Card payment. Choose one to complete the payment.

Note: Your credit card will be charged upon placement of your order.

Payments via Western Union, Money Gram and Bank Transfer

If you would like to place your order, please contact us with the following information:

E-mail: service@uncuco.com

WhatsApp: +8615989288128

Your billing and delivery address.
Your full name, phone number and email address.
The list of items you'd like to purchase.
We will get back to you with a proforma invoice, and the directions for the final step to complete the direct deposit.

The payment needs to be verified by our in-house accounts department and goods will only be dispatched on their verification. Only once the funds have reflected in our bank account, will the goods be allowed to leave the store.
Please note that bank transfer transactions can take up to 4 business days to clear into our account. We will process your order as soon as your payment has cleared. To ensure a speedy turn around time, please notify us once you have made the deposit.

We offer cardholders the highest level of security in online shopping, irrespective of the type of card (credit or debit). All debit or credit card payments are processed via Activa System’s Secure Payment Gateway. All payment card information is entered exclusively on the bank’s 3D secure pages. We as the merchant do not store, have access to or sight of the payments card information. Should you select to pay with a payment card, you will therefore be redirected to secure pages administered by the Activa processing centre and a bank with which we have reached a card acceptance arrangement.

Verified by Visa & Mastercard
The Verified by Visa and MasterCard SecureCode trademarks displayed above allow each online purchase made with your payment card to receive additional protection via 3D Secure security protocols. 3D Secure is a unique service offered by MasterCard and Visa International that uses a One Time Pin (OTP) to protect a cardholder against unauthorized use of their card. Once activated, your card number cannot be used for online purchases at participating merchants without your One Time PIN (OTP). The OTP is sent to your cell phone during payment as the final step to complete the transaction.

SHIPPING AND DELIVERY

Shipping prices will be calculated at check-out, based on the weight of the goods, the country to which we are dispatching, and the shipping service you choose. If you place the order offline by email or phone, we will send you a proforma invoice including the shipping prices.

When will I receive my order?

The likely delivery timescale for orders will depend on the availability of the items you order, the delivery method you choose (where applicable) and the shipping destination country.

Delivery times can be calculated based on formula: Time to stock + 7days~15days ( The time shipping company needs deliver the products to address in your country)

Time to stock is the number of days we need to prepare your order for shipment or how long manufacturer or supplier needs to deliver the product to our warehouse.

Delivery tracking

We use DHL or Fedex or UPS or EMS express service for our deliveries. The tracking number will be sent to you by email as soon as we will ship the order. Please note that no information will be available for the tracking number until the shipping company has actually picked up the package. Please allow up to one business day for tracking information to become available. All deliveries require a signature.

Please note

We are only able to dispatch goods once payment has been received.
All orders are subject to approval by our verification department. We will notify you by phone or email should your order be delayed.
If, for any reason, we cannot supply a product you have ordered, we will contact you via email or phone and place your product/s on back-order once you have agreed you would like to wait. If you choose to put your order on back-order, we will provide you with personalized weekly updates and will notify you once your order has shipped. If one or more of your items is in stock and you are waiting on other item/s, you can have your order part shipped. A sales representative will keep you updated on the remaining portion of your order, and can provide tracking information for both shipments.