The P43S Harp Microphone System from AMT is an updated, second generation harp microphone system that includes one AMT P43S mini condenser microphone with Iso-Ring technology, an AMT in-line preamp that requires phantom power, and a clamp to fit onto the harp. This mic system can be used to capture audio for live stage, recording studio, or rehearsal applications.The P43S captures the sound of the harp with detail and fidelity, and is attached to a two-part clip. The easy-to-use clip fits into the sound holes in the back of almost any harp. Simply turn the thumbscrew to loosen the clip, slide it over the edge of a sound hole, and tighten the thumbscrew again. The gooseneck can be bent to point the microphone straight in or at an angle, and position it either outside or inside the body of the harp.The P43S incorporates a flat frequency response and allows the microphone to reproduce sound as naturally as possible. The in-line preamp can be placed on the floor, in your pocket, or attached to a belt clip. A low-frequency roll-off filter and -10 dB pad are built into the inline preamp. This system includes a soft carrying pouch, 6′ cable, a P43S clamp, and the AMT in-line preamp (phantom power is required).Natural and even reproduction of sound, resistant to feedback, with the ability to capture the delicacies and beauty of a harpWill fit into the sound holes in the back of almost any harpFlat frequency response for accurate sound reproductionIn-line preamp can be placed on the floor, in your pocket, or attached to a belt clipA low roll-off filter as well as a dB cut are included on the in-line preampWhatsApp:+8615989288128, UNCUCO Radio / TV Studio Equipment 741360357792
AMT P43S SpecsMicrophoneSound FieldMonoCapsuleCondenser Polar PatternCardioidPerformanceFrequency Range20 Hz to 20 kHz ConnectivityOutput Connectors (Analog)1 x XLR 3-PinCable Length6′ / 1.83?mPowerOperating Voltage48 VPackaging InfoPackage Weight1.13 lbBox Dimensions (LxWxH)13.3 x 7.6 x 3.8″S
