AT2035 Overview Cardioid Condenser MicrophoneBalancing value and strong audio performance, the Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that’s accessible for home-based musicians, vocalists, and podcasters. The large-diaphragm condenser capsule incorporates a cardioid polar pattern for minimal feedback and off-axis noise, a welcome trait when tracking in untreated rooms. Plus, the supplied custom shockmount helps keep extraneous handling and foot noise down.
Engage the -10 dB pad to increase headroom and capture incredibly loud sources up to 158 dB SPL without distortion. When low-frequency rumble/hum or overwhelming bass invade your signal, turn on the 80 Hz high-pass filter switch to attenuate the lows without resorting to EQ. Since the AT2035 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power, or anything between 11 to 52 VDC.At Home or OnstageDesigned for critical home/project studio applications and live performance, this side-address cardioid condenser delivers detailed sonics and low noise. With its smooth, natural sound, the AT2035 is ideal for musicians, streamers, podcasters, and other content creators.Selectable SettingsEquipped with a switchable 80 Hz high-pass filter and -10 dB pad, the AT2035 easily handles high sound pressure levels (up to 158 dB) and avoids the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically coupled vibrations.Ready for Daily UseAlong with its rugged construction and high-performance specifications, the AT2035 provides reliable consistency from model to model. It comes with a protective pouch and a custom shockmount.Features at a GlanceLarge diaphragm for smooth, natural sound and low noiseHigh SPL handling and wide dynamic range provide unmatched versatilityCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound sourceSwitchable 80 Hz high-pass filter and -10 dB padCustom shockmount provides superior decoupling from vibrationsOperates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preampsBalanced XLR 3-pin output connectorWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 042005156733
Audio-Technica AT2035 SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleElectret CondenserPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePad-10 dBHigh-Pass Filter80 Hz, 12 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL148 dB SPL (1 kHz, 1% THD)158 dB SPL (1 kHz, 1% THD, with Pad)Impedance120 OhmsSensitivity-33 dBV/PaDynamic Range136 dB (1 kHz, at Max SPL)Signal-to-Noise Ratio82 dB (1 kHz)Equivalent Noise Level12 dB SPL A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage11 to 52 V (Phantom Power)Operating Current Consumption3.8 mAPhysicalColorBlackMountingShockmount (Included)Included CasePouchIncluded FiltersNoneDimensions?: 2.05 x L: 6.69″ / ?: 5.21 x L: 16.99?cmWeight14.2?oz / 403?gPackaging InfoPackage Weight1.905 lbBox Dimensions (LxWxH)10.65 x 10.6 x 3.25″S
