R?DE University – Recording Vocals with the R?DE NT1-AR?DE University – Recording Guitars with the R?DE NT1-ANT1-A Studio Secrets5 Ways to Protect Your Headphones | AurayOptimized for recording vocals in untreated rooms, this UNCUCO Kit includes the Rode NT1-A large-diaphragm condenser microphone, an adjustable reflection filter, a tripod mic stand, a clamp-on headphone holder, a shockmount with a detachable pop filter, and an XLR microphone cable.
Thanks to the reflection filter and the NT1-A’s cardioid polar pattern, room ambience can be reduced in your recordings. The supplied shockmount inhibits the transfer of vibrations to the mic and the pop filter helps control distracting vocal plosives, further contributing to clean signal quality.Rode NT1-A Large-Diaphragm Cardioid Condenser MicrophoneCombining a true condenser capsule and ultralow-noise circuitry, the Rode NT1-A large-diaphragm studio microphone offers a warm, clear, and quiet sonic signature that makes it popular for voice and instrument capture at home or in the studio. Plus, its bundle of accessories¡ªshockmount, pop filter, XLR cable, and dust cover¡ªhelp the NT1-A serve vocalists, rappers, and podcasters especially well. With low noise being a top priority of the NT1-A, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Additionally, the mic’s cardioid polar pattern naturally rejects a good deal of sound behind it, which yields less background noise and room sound than other patterns such as omnidirectional and figure-8. Since it can run on 24 or 48 VDC phantom power, the NT1-A can be used with a variety of professional and entry-level XLR mic preamps.Large-Diaphragm True CondenserThis true condenser (externally biased) features a 1″ gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.Cardioid Polar PatternThe cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambience, monitor bleed, and instruments behind the mic.Transformerless OutputThe transformerless output electronics result in an ultralow-noise output (just 5 dBA) while maintaining maximum signal gain.48V Phantom PowerThe NT1-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.Accessory PackageThe accessory package includes a studio-grade shockmount with an integrated pop filter, a premium 20′ XLR mic cable, a dust cover, and a downloadable instructional video packed with recording tips.Features at a GlanceTrue condenser (externally biased)Large 1″ capsule with gold-sputtered diaphragmCardioid polar pattern reduces background noiseSelf-noise of only 5 dBAUltralow-noise, transformerless, surface-mount circuitryWide dynamic rangeGold-plated XLR output contacts ensure optimal signal transferInternally shock-mounted capsuleIncludes SM6 shockmount, pop filter, and dust coverWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813000142Auray RF-5P-B Reflection Filter (Metal)The RF-5P-B Reflection Filter from Auray is designed to improve the quality of voice recordings captured in your home studio, rehearsal studio or other untreated acoustic environment by absorbing and isolating the microphone from unwanted ambient reflections. By absorbing and diffusing these reflections, the RF-5P-B creates a closer and dryer sound that allows more control over the vocals. It can also be used for other applications such as recording an acoustic guitar or an electric guitar cabinet.
Five punched metal panels and a pyramidal, acoustic foam lining filter ambient noise and help prevent sound from reflecting back into the microphone. The two outermost panels are adjustable, allowing you to control how dry your
recording will be.
Whether it’s a home studio or a rehearsal studio, for podcasting or broadcasting, the RF-5P-B Reflection Filter is designed to provide a portable solution for improved acoustic isolation.Three Different Mounting OptionsThreaded socket on the bottom can be mounted to a standard microphone stand, or the clamps on the back can be mounted to the shaft of a microphone stand with a boom arm. Also comes with non-slip feet for tabletop useWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628564220Auray RFMS-580 Reflection Filter Tripod Mic StandThe RFMS-580 Reflection Filter Tripod Mic Stand from Auray features heavy-duty steel construction and is capable of providing sturdy support to your reflection filter and studio microphone at the same time. The tripod stand design features collapsible legs for convenient storage, a telescoping center column that can be adjusted to reach a maximum working height of 68″.
The stand also features nonslip feet for added traction on hard surfaces as well as a 5/8″ threaded adapter for attaching a shockmount or mic clip.Provides sturdy support to a microphone and a reflection filter at the same timeMay also be used as a speaker stand (may require 3/8″ thread adapter)WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628576827Auray COHH-2 Clamp-On Headphones Holder for Mic StandThe Auray COHH-2 Clamp-On Headphones Holder for Microphone Stand easily attaches to microphone stands that are up to 1.2″ in diameter to provide a hanging hook that supports two pairs of studio headphones. With a sturdy all-metal construction, the holder attaches to the microphone stand using a durable threaded locking knob, which ensures the headphones remain in place and are conveniently accessible while tracking in the studio.Organize Your StudioKeep headphones accessible and uncluttered when trackingSupports Two Pairs of HeadphonesProvides sufficient support for two full-size pairs of studio headphonesDurable Locking KnobAssures that hook will not slip once firmly attached to mic standVersatileFits mic stands with tube diameters up to 1.2″SturdyAll-metal construction ensures years of reliable useWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628580312
Rode NT1-A Large-Diaphragm Cardioid Condenser Microphone SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, Acoustic Guitar, PercussionSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.40?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-State (JFET)PadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL137 dB SPLImpedance100 OhmsSensitivity-31.9 dBV/Pa at 1 kHzOutput Level13.7 mV (1 kHz)Dynamic Range132 dBSignal-to-Noise Ratio88 dB SPL (1 kHz)Equivalent Noise Level5 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNoneCable Length20′ / 6.1?mPowerBus PowerNoneOperating Voltage24 V (Phantom Power)48 V (Phantom Power)PhysicalColorSilverMountingShockmount (Included)Included CaseMic SockIncluded FiltersPop FilterDimensions?: 2 x L: 7.5″ / ?: 5 x L: 19?cmWeight11.5?oz / 326?gPackaging InfoPackage Weight4.59 lbBox Dimensions (LxWxH)15.35 x 10.65 x 5.25″Auray RF-5P-B Reflection Filter (Metal) SpecsFilter TypeReflection FilterFilter MaterialFoam, MetalDimensions15.8 x 12.6 x 10.2″ / 400.0 x 320.0 x 260.0?mmWeight9.5?lb / 4.3?kgPackaging InfoPackage Weight9.85 lbBox Dimensions (LxWxH)16.5 x 15.5 x 7.1″Auray RFMS-580 Reflection Filter Tripod Mic Stand SpecsStandHeight42 to 68″ / 106.68 to 172.72?cmCollapsed Size35.2″ / 89.41?cmGeneralWeight5.2?lb / 2.36?kgPackaging InfoPackage Weight5.8 lbBox Dimensions (LxWxH)35.75 x 5 x 4.25″Auray COHH-2 Clamp-On Headphones Holder for Mic Stand SpecsGeneralDimensions1.75 x 3 x 5.25″ / 4.4 x 7.6 x 13.3 cmWeight0.25 lb / 113.4 gPackaging InfoPackage Weight0.25 lbBox Dimensions (LxWxH)3.9 x 2 x 1.75″S
