NT1-A Studio SecretsR?DE University – Recording Vocals with the R?DE NT1-AR?DE University – Recording Guitars with the R?DE NT1-ACombining a true condenser capsule and ultralow-noise circuitry, the Rode NT1-A large-diaphragm studio microphone offers a warm, clear, and quiet sonic signature that makes it popular for voice and instrument capture at home or in the studio. Plus, its bundle of accessories¡ªshockmount, pop filter, XLR cable, and dust cover¡ªhelp the NT1-A serve vocalists, rappers, and podcasters especially well. With low noise being a top priority of the NT1-A, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Additionally, the mic’s cardioid polar pattern naturally rejects a good deal of sound behind it, which yields less background noise and room sound than other patterns such as omnidirectional and figure-8. Since it can run on 24 or 48 VDC phantom power, the NT1-A can be used with a variety of professional and entry-level XLR mic preamps.Large-Diaphragm True CondenserThis true condenser (externally biased) features a 1″ gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.Cardioid Polar PatternThe cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambience, monitor bleed, and instruments behind the mic.Transformerless OutputThe transformerless output electronics result in an ultralow-noise output (just 5 dBA) while maintaining maximum signal gain.48V Phantom PowerThe NT1-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.Accessory PackageThe accessory package includes a studio-grade shockmount with an integrated pop filter, a premium 20′ XLR mic cable, a dust cover, and a downloadable instructional video packed with recording tips.Features at a GlanceTrue condenser (externally biased)Large 1″ capsule with gold-sputtered diaphragmCardioid polar pattern reduces background noiseSelf-noise of only 5 dBAUltralow-noise, transformerless, surface-mount circuitryWide dynamic rangeGold-plated XLR output contacts ensure optimal signal transferInternally shock-mounted capsuleIncludes SM6 shockmount, pop filter, and dust coverWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813000142
Rode NT1-A SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, Acoustic Guitar, PercussionSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.40?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-State (JFET)PadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL137 dB SPLImpedance100 OhmsSensitivity-31.9 dBV/Pa at 1 kHzOutput Level13.7 mV (1 kHz)Dynamic Range132 dBSignal-to-Noise Ratio88 dB SPL (1 kHz)Equivalent Noise Level5 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNoneCable Length20′ / 6.1?mPowerBus PowerNoneOperating Voltage24 V (Phantom Power)48 V (Phantom Power)PhysicalColorSilverMountingShockmount (Included)Included CaseMic SockIncluded FiltersPop FilterDimensions?: 2 x L: 7.5″ / ?: 5 x L: 19?cmWeight11.5?oz / 326?gPackaging InfoPackage Weight4.59 lbBox Dimensions (LxWxH)15.35 x 10.65 x 5.25″S
