For singers, rappers, and musicians who need a large-diaphragm studio condenser mic and don’t have the funds to go big, the Tascam TM-80 presents a simple solution. Since it shares design characteristics with pricier mics and has no switches to configure, it offers a blend of quality and ease of use that makes it appealing for home recording. Also included with the mic are a shockmount, tabletop tripod stand, and mic cable, making the TM-80 a complete mic package.
The heart of the mic is its 0.7″ aluminum-diaphragm condenser capsule, which produces a hotter output level and wider frequency range than most dynamic mics. Use it on vocals, acoustic instruments, or even guitar/bass speaker cabinets. By utilizing a cardioid polar pattern, the TM-80 is able to capture less room sound and background noise than the omnidirectional mics found in computers and mobile devices. For proper functionality of the TM-80, it should be plugged into to the XLR input of a device that can supply phantom power.For Vocal and Instrument RecordingThe TM-80 offers strong output signal and full-spectrum tone that enables it to clearly reproduce vocals (sung or spoken) as well as instruments, thanks to its high sensitivity and 20 Hz to 20 kHz frequency response. Compared to a typical handheld dynamic mic, the TM-80 needs less gain and produces a wider frequency response. Considering its maximum SPL handling of 136 dB, it can also be used on guitar cabinets and some drum miking applications.Friendly for Home SetupsWhereas most mics built into computers and smartphones pick up sound from all directions, the TM-80’s cardioid condenser element captures minimal sound behind it. This behavior allows it to lessen the presence of room reflections in recordings, a significant benefit when working in places that lack acoustic treatment.Phantom Power RequiredSince the TM-80 needs phantom power to operate, it must be connected to a device that can send phantom power rated between 9 and 48 VDC, which most audio interfaces, mixers, and mic preamps can do. Rather than plugging the mic into a computer soundcard or a mobile device, the TM-80 is designed to be connected to an XLR mic input.Shock-Absorbing MountBy placing the TM-80 in the included shockmount, it is decoupled from the stand and separated from vibrations and rumble that would otherwise travel through the stand to the mic. Use the supplied mini tripod for convenient tabletop positioning, or attach the shockmount on a larger mic stand when you need to use it while standing or recording instruments from above.Features at a GlanceTraditional side-address designCondenser capsule with 0.7″ aluminum diaphragmCardioid polar pattern keeps the recording from sounding too ambientHigh sensitivityWide frequency response (20 Hz to 20 kHz)XLR output connectorRequires phantom power (9 to 48 VDC)Sturdy die-cast zinc housingIncludes shockmount, tabletop tripod stand, and XLR cableWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 043774031634
Tascam TM-80 SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm0.71″ / 18?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL136 dB SPL (1 kHz, 1% THD)Impedance200 Ohms ¡À 30% at 1 kHzLoad Impedance> 1000 OhmsSensitivity-38 dBV/Pa at 1 kHzSignal-to-Noise Ratio77 dB Equivalent Noise Level17 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNoneCable Length6′ / 1.8?mPowerBus PowerNoneOperating Voltage9 to 48 V (Phantom Power)PhysicalColorSilverMountingShockmount (Included)Included CaseNoneIncluded FiltersNoneConstruction MaterialDie-Cast ZincDimensions?: 1.9 x L: 6.5″ / ?: 4.8 x L: 16.5?cmWeight10.6?oz / 301?gPackaging InfoPackage Weight1.79 lbBox Dimensions (LxWxH)11.7 x 4.95 x 3.05″S
