AT2020 Overview | Cardioid Condenser MicrophoneThe black Audio-Technica AT2020 Cardioid Condenser Microphone is designed to bring sonic performance distilled from the company’s reputable studio condensers to the realm of home recording for podcasters, musicians, and content creators. The capsule features a low-mass, side-address diaphragm with a cardioid polar pattern for rejecting ambience and noise behind the mic, a welcome trait when tracking in untreated rooms. It comes with a pivoting stand mount for straightforward attachment to your existing mic stand. The AT2020’s extended, linear frequency response enables the flexibility to accurately reproduce signals from a wide variety of sources such as vocals, speech, and instruments. High SPL handling and wide dynamic range allow the AT2020 to capture loud signals with minimal noise and distortion. Since the AT2020 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power.Studio Quality at HomeDesigned for home/project studio applications, this side-address cardioid condenser mic is engineered for extended frequency response and enhanced transient response. With its studio-quality articulation and intelligibility, the AT2020 is ideal for musicians, streamers, podcasters, and other content creators.Cardioid Polar PatternThe AT2020’s cardioid polar pattern primarily picks up sound in front of the mic while being far less sensitive to sound behind the mic, allowing it to capture your voice or instrument with reduced background noise.Ready for Daily UseAlong with its rugged construction and high-performance specifications, the AT2020 provides reliability, high SPL handling, and wide dynamic range. It comes with a space-saving stand mount for 5/8″-27 threaded stands, an adapter for 3/8″-16 threaded stands, and a protective pouch.Features at a GlanceCustom-engineered 0.6″ low-mass diaphragmExtended frequency response and superior transient responseHigh SPL handling and wide dynamic range provide great versatilityCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound sourceStand mount allows placement in tight spotsOperates on 48 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preampsBalanced XLR 3-pin output connectorWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 042005134953
Audio-Technica AT2020 SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleElectret CondenserDiaphragm0.6″ / 16?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL144 dB SPL (1 kHz, 1% THD)Impedance100 OhmsSensitivity-37 dBV/Pa (Open Circuit Voltage)Dynamic Range124 dB (Typical, 1 kHz, at Max SPL)Signal-to-Noise Ratio74 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL)Equivalent Noise Level20 dB SPL A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage48 V (Phantom Power)Operating Current Consumption2 mAPhysicalColorBlackMountingMic Clip/Stand Adapter (Included)Included CaseZipper PouchIncluded FiltersNoneDimensions?: 2.05 x L: 6.38″ / ?: 5.21 x L: 16.21?cmWeight12.1?oz / 343?gPackaging InfoPackage Weight1.75 lbBox Dimensions (LxWxH)9.75 x 9.6 x 2.9″S
