The New RODE NT1 Condenser MicrophoneRead MoreIntroducing the new R?DE NT15 Ways to Protect Your Headphones | AurayAn all-in-one solution for quality, low-noise vocal or instrument recording in your home studio or anywhere inspiration strikes, the Rode Complete Studio Kit combines the AI-1 desktop 1×2 USB Type-C audio interface with the NT1 large-diaphragm cardioid condenser microphone, the SM6 advanced shockmount and pop filter combo, a premium XLR cable, a USB Type-C to USB Type-A cable, and a copy of Ableton Live Lite DAW software. You just need your computer and a mic stand to get started.Rode NT1-KIT Large-Diaphragm Cardioid Condenser MicrophoneCombining a redesigned true condenser capsule, ultralow-noise transformerless circuitry, and an extremely durable housing, the Rode NT1-KIT large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even on stage. Plus, its bundle of accessories¡ªshockmount, pop filter, XLR cable, and dust cover¡ªhelp the NT1-KIT serve singers, rappers, and podcasters especially well.
While the body of the NT1 still resembles the NT1-A, the mic has been completely revamped except for the mesh grille. It features Rode’s updated HF6 capsule, which is designed to provide a detailed midrange response with smooth highs and warm bass. The HF6 capsule is suspended inside the microphone using Rycote’s industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an exceedingly quiet microphone. Since it can run on 24 or 48 VDC phantom power, the NT1 can be used with a variety of professional and entry-level XLR mic preampsNT1 vs NT1-AAlthough the body of the NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille. Rode’s design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule, which is a completely new design. Codenamed the HF6, it is the perfect example of Rode’s fusion of artistic design approaches and cutting-edge manufacturing techniques, and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise.Tone SignatureIt has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round bass reproduction to make the NT1 an absolute standout in its class.Internally Shock-Mounted CapsuleThe transducer itself is suspended inside the microphone using Rycote’s industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 is an incredibly quiet microphone, measuring only 4.5 dBA of self-noise.Durable HousingThe NT1’s body is machined from 6061 aluminum and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by Rode to ensure an extremely hard wearing finish that is resistant to scratches or marks.Bundled AccessoriesThe NT1 is supplied with the SM6, a high-quality suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility. The mic also comes with a balanced XLR microphone cable.Features at a GlanceLarge 1″ capsule with gold-plated membraneCardioid polar pattern rejects off-axis sound behind the micInternal Rycote Lyre-based capsule shock-mounting systemUltralow-noise transformerless circuitryState-of-the-art, surface-mount electronicsHeavy-duty matte black finishGold-plated XLR output connectorOperates on 24 or 48 VDC phantom powerIncludes shockmount, pop filter, dust cover, and XLR mic cableWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813003044Rode AI-1 Studio-Quality USB Audio InterfaceThe Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4″ input with phantom power, two balanced 1/4″ monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.
The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.Desktop USB audio interface with low-noise Class-A discrete preamplifierSampling rate of up to 96kHz/24-bitOne combo XLR-1/4″ combo inputTwo balanced 1/4″ monitor outputsOne discrete, studio-quality headphone outputPhantom power for condenser microphonesZero-latency monitor modeUSB bus poweredUSB Type-C connector for future proof operationRugged body with Satin Black FinishClass compliant¡ªno drivers requiredIncludes Ableton Live LiteIncludes USB cableWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813005130
Rode NT1-KIT Large-Diaphragm Cardioid Condenser Microphone SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsule1 x CondenserDiaphragm1″ / 25.40?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-State (JFET)PadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL132 dB SPLImpedance100 OhmsSensitivity-29 dBV/Pa at 1 kHzOutput Level8 mV (Max, 1 kHz)Dynamic Range128 dBSignal-to-Noise Ratio90 dB A-WeightedEquivalent Noise Level4.5 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage24 V (Phantom Power)48 V (Phantom Power)PhysicalColorBlackMountingShockmount (Included)Included CaseNoneIncluded FiltersPop FilterConstruction MaterialAluminumDimensions?: 2 x L: 7.4″ / ?: 5 x L: 18.7?cmWeight15.5?oz / 440?gPackaging InfoPackage Weight4.95 lbBox Dimensions (LxWxH)10.5 x 8.25 x 6.75″Senal XU-1648 XLR-USB Interface SpecsForm FactorInlineDisplayNoneChannels of I/O1 Input at 48 kHzMaximum Sampling Rate48 kHz / 16-BitNumber of Microphone Preamps1 PreampExpansion SlotsNoneGain/Trim RangeInputs:35 dB ConnectivityAnalog Audio I/O1 x XLR 3-Pin Mic Input1 x 1/8″ / 3.5 mm TRS Headphone OutputPhantom Power48 V ¡À 2 VPhantom Power Current15 mA per ChannelDigital Audio I/ONoneHost Connection / USBUSB Type-B (USB 2.0)USB (Non-Host)NoneSync I/ONoneNetwork I/ONoneMIDI I/ONoneWireless ConnectivityNonePerformanceFrequency Response25 Hz to 20 kHz Headphone Output Power50 mW into 16 OhmsImpedanceInputs:1.2 Kilohms Digital AudioSample Rates32 / 44.1 / 48 kHz (D/A Conversion) 8 / 11.025 / 16 / 22.05 / 32 / 44.1 / 48 kHz (A/D Conversion) Bit Depths16-BitMemory Card SlotNoneCompatibilityOS CompatibilityWindowsmacOSIncluded SoftwareNonePowerPower RequirementsUSB Bus PowerPower Consumption2.2 WPhysicalDimensions5.1 x 1.2 x 1.1″ / 13 x 3.1 x 2.8?cmWeight3.3?oz / 94.0?gPackaging InfoPackage Weight0.55 lbBox Dimensions (LxWxH)6.95 x 6.65 x 1.65″Auray RF-CM-S Reflection Filter (Silver) SpecsFilter TypeReflection FilterAdjustable Height12.00 to 18.00″ / 30.5 to 45.7?cmFilter MaterialFoam, MetalDimensions19.8 x 11.0 x 12.0″ / 50.0 x 28.0 x 31.0?cmWeight4.45?lb / 2?kg (with Mount)Packaging InfoPackage Weight7.5 lbBox Dimensions (LxWxH)20 x 13 x 11″Auray RFMS-580 Reflection Filter Tripod Mic Stand SpecsStandHeight42 to 68″ / 106.68 to 172.72?cmCollapsed Size35.2″ / 89.41?cmGeneralWeight5.2?lb / 2.36?kgPackaging InfoPackage Weight5.8 lbBox Dimensions (LxWxH)35.75 x 5 x 4.25″Kopul Studio Elite 4000 Series Neutrik XLR M to XLR F Microphone Cable (10′, Black) SpecsContact PlatingSilverCable Length10′ / 3?mWire Gauge24 AWGShielding98% BraidPackaging InfoPackage Weight0.6 lbBox Dimensions (LxWxH)9.45 x 8.65 x 1.15″S
