Styled in a champagne finish, the MXL 990 is a large-diaphragm condenser mic made to give home-based producers, musicians, and vocalists a cool, vintage-looking mic that sounds good and sits comfortably below the triple-digit price point. It includes a vibration-absorbing shockmount and a space-saving stand adapter, allowing professional and flexible mic placement. Plus, the supplied carrying case is perfect for safely transporting the mic and its accessories to a different recording location. Inside the vintage-style body are quality components¡ªa 6-micron, gold-sputtered diaphragm and an FET preamp with a balanced output. These allow the MXL 990 to impart tight lows and mids along with sweet highs. The mic’s directional response helps reduce the background noise that plagues many home recordings. Unlike battery-powered miniature mics, the MXL 990 needs to be plugged into the XLR mic input of any audio interface, mixing board, or microphone preamp that can supply 48V phantom power.For Singers and Working MusiciansWith silky highs and solid lows and midrange, the MXL 990 offers the tonal performance needed to meet the standards of analog and digital recording systems. Equally capable for vocals and instruments like piano and acoustic guitar, the MXL 990 produces full-bandwidth tone and a healthy output level that requires less gain than typical dynamic microphones.High Quality for Home StudiosMany home recording setups don’t have the acoustic treatment that professional studios utilize to absorb and disperse sound evenly. As a result, room ambience and background noise are problems commonly experienced at home. The MXL 990 has a cardioid polar pattern, which picks up very little sound behind the mic. This enables it to capture more of the sound in front of it and less of everything else.Phantom PoweredAs a condenser mic with a FET preamp, the MXL 990 requires phantom power to operate in any environment. So, it should be connected via an XLR cable (available separately) to a mixing board, a microphone preamp, or an audio interface that can send +48V phantom power.Shockmount and Stand AdapterTwo mounting options are included with the MXL 990. For the cleanest recordings, use the shockmount, which absorbs vibration noise. Switch to the mic stand adapter if you’re positioning the mic in an extremely tight space where the shockmount wouldn’t fit.Features at a GlanceSide-address design with vintage body styleCondenser capsule with a 6-micron, gold-sputtered diaphragmCardioid polar pattern attenuates ambience and background noiseHigh sensitivity and full frequency response (30 Hz to 20 kHz)FET preamp with balanced outputInternally wired with MogamiXLR output connectorRequires 48V phantom powerIncludes custom shockmount, mic stand adapter, and carrying caseWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 801813080643
MXL 990 SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsule1 x CondenserPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range30 Hz to 20 kHz Maximum SPL130 dB SPL (.5% THD)Impedance200 OhmsSensitivity15 mV/PaSignal-to-Noise Ratio80 dB A-WeightedEquivalent Noise Level20 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage48 V ¡À 4 V (Phantom Power)Operating Current Consumption3 mAPhysicalColorSilverMountingMic Clip/Stand Adapter, Shockmount (Included)Included CaseHard CaseIncluded FiltersNoneDimensions?: 2.36 x L: 5.11″ / ?: 5.99 x L: 12.98?cmWeight1.2?lb / 0.5?kgPackaging InfoPackage Weight2.915 lbBox Dimensions (LxWxH)11.9 x 7.6 x 3.5″S
