The matte gray Schoeps Colette CMC 6 Microphone Amp and MK 2 Omnidirectional Condenser Capsule is a Colette Series modular mono omnidirectional condenser microphone bundle designed to provide linear frequency response at 0¡ã and transparent, low-distortion sound pickup, making it ideal for close-miking instruments.
It includes the CMC 6U microphone amplifier, the MK 2 condenser capsule, a foam windscreen, a stand clamp, and a premium case. The microphone features a transformerless Class-A output stage and supports 12V or 48V phantom power.Schoeps CMC6-U 12-48 Volt Phantom Power Supply and Output Stage for Colette Modular CapsulesThe Schoeps CMC6-U is a balanced output stage and +12 to +48V phantom power supply for the Schoeps Colette series modular capsules. The transformer-less output stage ensures low-noise and pristine audio reproduction throughout. The CMC6-U is terminated with a standard balanced 3-pin XLR connection for use with standard microphone inputs and preamplifiers. Schoeps MK2 Omni-directional Capsule for CMC PreamplifiersThe Schoeps MK2 is part of the Colette series of modular capsules designed for use with the CMC preamplifiers. Designed for close proximity capturing, the MK2 retains a uniform frequency response when used close to the signal source, avoiding overly brilliant or sharp signal reproduction. The MK2’s signal character is similar to measurement microphones and is often used in acoustic measurement and calibration applications. Omni-directional Pattern The omni-directional Polar pattern provides a wide uniform pick up response at the main and off-axis sections of the microphone capsule.Uniform Response The MK2 features a uniform frequency response when used in close positioning of the signal source. Wide Linear Frequency Response The wide frequency response ensures accurate detail regardless of the source signal.Schoeps Solid Foam Teardrop Popscreen for Schoeps Colette Series Microphones (Gray)This gray Solid Foam Teardrop Popscreen from Schoeps is an acoustic foam close-speech popscreen intended for use with Schoeps Colette Series microphones, but compatible with other microphone capsules as well. It provides sufficient protection at normal speaking distances for cardioids and other directional capsules, especially when speech capsules are used. With omnidirectional capsules, it may even be used outdoors in light wind. This popscreen has minimal effect on sound quality.For moderate distances from the person speakingCan also be used as a windscreen for pressure transducersNegligible effect on sound quality
Schoeps CMC6-U 12-48 Volt Phantom Power Supply and Output Stage for Colette Modular Capsules SpecsPackaging InfoPackage Weight0.8 lbBox Dimensions (LxWxH)7.6 x 4.45 x 1.7″Schoeps MK2 Omni-directional Capsule for CMC Preamplifiers SpecsTransducerCondenser Polar PatternOmni-directional (MK2)Frequency Response20Hz to 20KHz (MK2)Dynamic Range (Typical)not specified by manufacturerSignal-to-Noise Ratio83 dB-A (MK2)Maximum Input Sound Level130dB (MK2)Power Requirements12V – 48V Phantom Power (CMC6)Output ImpedanceMinimum Load: 600 Ohms (CMC6)
(If a lower load impedance is used, the main effect
will be to reduce the maximum output level of the microphone.)Output Connectors3-pin XLR (CMC6)PadNo Low Frequency Roll-OffNoDimensions4.57 x .78″ (116 x 20mm) (Length x Diameter) (with CMC6)Weight68g (with CMC6)Packaging InfoPackage Weight0.1 lbBox Dimensions (LxWxH)7.4 x 4.02 x 1″Schoeps Solid Foam Teardrop Popscreen for Schoeps Colette Series Microphones (Gray) SpecsMaximum Noise Attenuation20?dBA in 11?mph / 18?km/h WindMaterialFoamOuter Diameter1.77″ / 45?mmLength2.75″ / 70?mmPackaging InfoPackage Weight0.02 lbBox Dimensions (LxWxH)6.4 x 3.05 x 1.9″S
