150W Basic Complete FM Radio Station Package

This 150W Basic Complete Radio Station Package is a very economic and good quality complete radio station set up and get you on the air to start broadcasting.

This 150W FM radio station package include one 150W FM transmitter, one dipole antenna, one 20M coaxial cable, one 12channel console mixer, two microphones, two BOP covers, two monitor headphones, one pair monitor speakers, two microphone stands, one audio processor.

Please note that we take any items out if it is still beyond your budget or we can add or replace any items to suit your specific needs.

150W FM Transmitter

• The integrated LCD screen displays all the parametric including: transmitter frequency, stereo and mono, volume, amplifier tube temperature, audio signal UV meter, forward power, reflected power, modulation mode, pre-emphasis etc,.
• With built-in high-quality stereo encoder, CD-class sound quality.
• Signal input supports XLR and RCA audio inputs, and also SCA and RDS signals using the BNC connector AUX.
• Supports AES-EBU digital signal input.
• The RF amplifier uses LDMOS transistors .
Frequency: 87.5-108MHz,
Frequency step value: 10KHz
RF output power: 0 ～150W ± 0.5dB
RF output impedance: 50Ω
RF output connector: L16 female N
Pre-emphasis: 0μs, 50μs, 75μs (users can set)
Power supply voltage range: single phase 110 ~ 260Vac
Power consumption: <320VA
Operating temperature range: -20 to 45 ° C
Working method: continuous work
Cooling method: forced air cooling
Dimensions: 483 x 320 x 88 mm
Weight: 10Kg

800W Dipole Antenna

This is an omni-directional FM broadcast dipole antenna, which is made of aluminum treated with alodyne so this 800W FM dipole antenna is light and resistant. All metal parts are electrically grounded, stainless steel screw.

Frequency range: 87.5MHz ~ 108MHz
Input maximum standing wave ratio: ≤1.25
RF input power: ≤ 800 W
RF input impedance: 50Ω
RF input connector: L16    N
Gain: 2dB
Net Size：250 x 50 x 800mm (without measuring handles and protrusions)
Weight：4KG

20meters -7 coaxial cable with connectors

BEHRINGER Xenyx QX1202USB Mixer

Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and Compressors, British EQs, Klark Teknik Multi-FX Processor and USB/Audio Interface

4 microphone inputs with 48-volt phantom power, compressor, 3-band EQ and peak LEDs 1 AUX post-fader 4 stereo inputs Internal Klark Teknik multi-effect device 2 Track inputs and outputs Master fader USB audio interface Dimensions (H x W x D): 50 x 250 x 248 mm External power supply.

Along with their built-in USB/audio interfaces, the QX1202USB comes with all the recording and editing software needed to turn your computer system into a complete, high-performance home recording studio.

AKG  Monitor Headphone

Headphones
Closed
Circumaural
Impedance: 32 Ohm
Sensitivity: 110 dB SPL/V
Frequency range: 18-20000 Hz
Max. input level: 200 mW
2.5 m Cable with 3.5 mm jack and 6.3 mm adapter
Weight: 200 g

EDIFIER Monitor Speaker

2-Way Digital Monitors deal for computer studios, audio and multimedia workstations True bi-amping mode with 4 amplifiers – 2 per speaker 150 W digital power amplification 1″” Silk dome tweeter Long-excursion 5″” woofer Frequency range: 55 – 20000 Hz Maximum SPL: 100 dB @ 1 m Advanced Waveguide Technology for extra big sweet spot Setting options for room adjustment USB input for direct connection to a computer (plug and play, no driver required) Two analogue inputs with XLR and TRS connections – can be used simultaneously with a digital signal source Plastic housing Dimensions: 254 x 204 x 178 mm Weight: 6.5 kg 2 m speaker cable included

COMPOSER PRO-XL MDX2600 V2

The reference-class MDX2600 is a marvelous dual-channel Expander/Gate/Compressor/Peak Limiter that is ideal for: compressing mono/stereo signals and providing virtually inaudible noise suppression, without loss of high frequencies; increasing vocal presence and energy; and limiting, or smoothing out extremely-high signal peaks. Additionally, the MDX2600 features an integrated Dynamic Enhancer, De-Esser, Low-Contour filter and our revolutionary, switchable Tube simulation – for the extra warmth and transparency of classic tube circuitry. Put simply, the MDX2600 can do amazing things for your vocals or instruments – providing virtually everything you need for studio-quality dynamics processing!

Studio Microphone

It is a professional wide-diaphragm condenser mic with and internal 6dB 100hz low frequency roll off switch and very cute shape. It characters with high sensitivity, low noise, wide frequency response and high SPL handling as well, thus make it ideal for on-stage performance, instrument and vocal recording. It is perfect for broadcasting and sound performance. Besides, it is also the better choice for those music fans and home-recorders.

High Performance FET Condenser MIC
1、High-SPL capability
2、Extended frequency response
3、Exceptionally wide dynamic range
4、Pure and realistic sound quality

iSK Microphone Stand

Adjustable to any position
4 outbuilt springs
Horizontal or vertical installation
Hollow beam enable cable go through inside
Stable design of 2 tubes lower section and 2 tubes upside
5*2.5M double shield mic cale with metal connector
ASD-40 mic arm has a wide recording range
Can be widely used for personal recording podcast etc

Height can be adjusted;
The stand can be fixed or locked on the table;
Can be clamped on the table
Microphone Scissor Arm

BOP Cover

* Large double filter

* Broadcast Recording

* Microphone BOP cover