The Ta6 Microphone System with Preamp from AMT includes Ta6 Double-Collapsible Multi-purpose Microphone System and Inline Preamp System. The Ta6 Double-Collapsible Microphone System is a multi-purpose microphone system for soprano, tenor, alto, and bari saxophones. The microphone can be used as a double microphone setup for soprano saxophone, but can be reduced to a single microphone for tenor, alto, and bari saxophones. With an optional extension kit, the Ta6 can also work with straight alto and straight tenor saxophones, and can be used with Shure, Sennheiser, and Sabine wireless systems with optional cables.
Additionally, the system comes with an AMT Inline Preamp that powers the microphone via the phantom power. The inline preamp includes a -10 dB cut as well as a low-frequency roll-off filter. The cut is used depending on the gain structure of your particular mixing board. The cut filter can be used if the microphone is being used in conjunction with sub-bass or if you need to remove low frequency. The inline preamp can be clipped to a music stand or worn on the belt. The output is an XLR to the mixing board and the input is a Ta3 locking mini connector from the microphone.AMT Ta6 Double Collapsible Multi-purpose Microphone SystemThe Ta6 Double Collapsible Microphone System from AMT is a multi-purpose microphone system for soprano, tenor, alto, and bari saxophones. The microphone can be used as a double microphone setup for soprano saxophone, but can be reduced to a single microphone for tenor, alto, and bari saxophones. With an optional extension kit, the Ta6 can also work with straight alto and straight tenor saxophones, and can be used with Shure, Sennheiser, and Sabine wireless systems with optional cables.CompatibilitySoprano, tenor, alto, and bari saxophones2-in-1 microphone systemFlexible single microphone clamp allows placement on any flanged bell instrumentIncludes disconnect and double mic/iso-ring suspension systemPredetermined mix between two micsSuitable for AMT Wi5C, Wi5IIB, Wi5IIC, and Q7 wireless systemsAMT Inline Preamp/ Power Supply SystemThe AMT Inline Preamp/ Power Supply System comes stock with some AMT Models and microphones that use a disconnecting cable. A perfect choice to use as a hardwired backup preamp with AMT Models. Phantom power is required for operation.Works with all D.C.T. MicrophonesOperates with all disconnecting cable microphones when a single channel preamp is necessaryReliable Hardwired PreampAMT durability and reliability for all preamp applications
AMT Ta6 Double Collapsible Multi-purpose Microphone System SpecsMicrophoneCapsuleCondenser Polar PatternCardioidPerformanceFrequency Range50 Hz to 18 kHz Impedance150 OhmsConnectivityOutput Connectors (Analog)1 x XLR 3-PinCable Length6′ / 1.8?mPowerOperating Voltage11 to 52 VBattery Type1 x 9 VPhysicalDimensionsL: 3.5″ / L: 8.89?cm (Gooseneck)Weight1.27?oz / 36?gPackaging InfoPackage Weight2.85 lbBox Dimensions (LxWxH)15.3 x 10.9 x 3.8″AMT Inline Preamp/ Power Supply System SpecsGeneralIn-Line Accessory TypePre-AmplifierPackaging InfoPackage Weight0.2 lbBox Dimensions (LxWxH)3.75 x 3.25 x 1.25″S
