AT2020PK and AT2035PK Setup and Microphone Use Streaming/Podcasting PacksIdeal for solo podcasters, this UNCUCO Kit includes the Audio-Technica AT2035 cardioid condenser microphone, an in-line XLR-to-USB audio interface, closed-back studio headphones, a boom arm with an XLR cable, and a nylon pop filter with a gooseneck. Between the mic’s ambience-reducing polar pattern, the interface’s plug-and-play functionality, and the vibration-isolating shockmount, this kit enables you to easily record clean and clear speech for podcasts in the convenience of your own home.Audio-Technica AT2035 Cardioid Condenser MicrophoneBalancing value and strong audio performance, the Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that’s accessible for home-based musicians, vocalists, and podcasters. The large-diaphragm condenser capsule incorporates a cardioid polar pattern for minimal feedback and off-axis noise, a welcome trait when tracking in untreated rooms. Plus, the supplied custom shockmount helps keep extraneous handling and foot noise down.
Engage the -10 dB pad to increase headroom and capture incredibly loud sources up to 158 dB SPL without distortion. When low-frequency rumble/hum or overwhelming bass invade your signal, turn on the 80 Hz high-pass filter switch to attenuate the lows without resorting to EQ. Since the AT2035 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power, or anything between 11 to 52 VDC.At Home or OnstageDesigned for critical home/project studio applications and live performance, this side-address cardioid condenser delivers detailed sonics and low noise. With its smooth, natural sound, the AT2035 is ideal for musicians, streamers, podcasters, and other content creators.Selectable SettingsEquipped with a switchable 80 Hz high-pass filter and -10 dB pad, the AT2035 easily handles high sound pressure levels (up to 158 dB) and avoids the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically coupled vibrations.Ready for Daily UseAlong with its rugged construction and high-performance specifications, the AT2035 provides reliable consistency from model to model. It comes with a protective pouch and a custom shockmount.Features at a GlanceLarge diaphragm for smooth, natural sound and low noiseHigh SPL handling and wide dynamic range provide unmatched versatilityCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound sourceSwitchable 80 Hz high-pass filter and -10 dB padCustom shockmount provides superior decoupling from vibrationsOperates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preampsBalanced XLR 3-pin output connectorWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 042005156733Audio-Technica ATH-M20x Closed-Back Monitor Headphones (Black)Bringing the acclaimed features of the M-Series headphones to a price point that’s accessible for all, the black Audio-Technica ATH-M20x monitor headphones offer solid build quality and audio performance for musicians and content creators recording and mixing at home. Outfitted with 40mm dynamic drivers and an over-ear, closed-back design, the ATH-M20x headphones deliver enhanced bass response and wide bandwidth (15 Hz to 20 kHz) while isolating you from outside sounds.
Thanks to the 15¡ã swiveling earcups, high-quality materials, and generous cushioning on the headband and earpads, the headphones are both durable and comfortable to wear. Exiting from the left earcup, the attached 9.8′ cable reduces tangles and simplifies channel identification. The cable sports a 3.5mm mini plug for use with mobile devices and computer soundcards, and a 1/4″ snap-on adapter is included for easy hookup to audio interfaces, mixers, and stereo receivers.40mm DriversThe ATH-M20x features 40mm dynamic drivers with rare earth (neodymium) magnets and CCAW (copper-clad aluminum wire) voice coils for quality sound reproduction at a competitive price point.Tuned for Enhanced Bass ResponseThe drivers and headphone design work together to provide a sonic signature tuned for enhanced bass performance. With a frequency response of 15 Hz to 20 kHz, the ATH-M20x can reproduce a full spectrum of tones.Over-Ear, Sound-Isolating DesignThe ATH-M20x utilizes a circumaural design that contours around the ears for excellent sound isolation in loud environments. This over-ear, closed-back style is optimal for reducing bleed and separating you from outside sounds.15¡ã Swiveling EarcupsEquipped with 15¡ã swiveling earcups, the ATH-M20x ensures a great fit.Attached Single-Sided CableKeeping it simple and clean, the ATH-M20x incorporates an attached 9.8′ cable that exits from the left side. This increases convenience and makes it easier to distinguish the different sides of the headphone.3.5mm Plug and 1/4″ Snap-On AdapterThe attached cable is terminated with a straight 3.5mm TRS mini plug for easy hookup to mobile devices, MP3 players, and computer headphone jacks. A 1/4″ snap-on adapter is included for compatibility connectivity with audio interfaces, mixers, and dedicated headphone amplifiers.Solid Build QualityThanks to the high-quality materials used in the ATH-M20x, the headphones balance comfort and strength while delivering enhanced audio and effective isolation.Senal XU-1648 XLR-USB InterfaceThe XU-1648 from Senal is a compact XLR-to-USB adapter interface that allows you to plug your microphone into the USB port of any Mac or Windows computer for use with your favorite digital recording software. Its rugged build and plug-and-play operation make it perfect for bands, recording artists, podcasters, and more.For use with dynamic or condenser microphones, the XU-1648 delivers 16-bit / 48-kHz studio-quality sound. It also features a microphone preamp with gain control and switchable 48V phantom power. Its 3.5mm headphone output features a volume control and allows for zero-latency monitoring. There is also a monitor level control to adjust the balance between the audio playback from your computer and the sound of your microphone.In addition, the XU-1648 features a tough, all-metal chassis with nonslip neoprene feet on the bottom to prevent it from slipping.Plug-and-play XLR-to-USB adapterRugged metal chassis16 bit / 48 kHz studio-quality soundLow-noise mic preamp with gain control3.5mm latency-free headphone output with level controlMonitor output adjusts balance between audio playback and live micPeak-level indicator to help avoid clippingUSB bus powered6.3′ USB cable includedWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628569874Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and BoomsDesigned for use with microphones, the Auray PFNY-6 is a pop filter that minimizes vocal plosives and reduces errant breath noise. It’s suitable for home and pro studios alike and lends itself to all sorts of recording applications including vocals, voiceovers, broadcasts, and podcasts.The PFNY-6 utilizes a double-layered nylon screen, affording a clear view of the capsule, so the PFNY-6 won’t impede a vocalist from giving a robust-sounding performance, captured on-axis. Additionally, this screen protects your microphone capsule from corrosive moisture.Its 13″ flexible gooseneck will give you plenty of room to maneuver, allowing you to place the screen as close to the capsule as you’d like. A sturdy C-clamp with a thumbscrew fastener protects against slippage, while a rubber grommet and padding protect your mic stand’s finish.General FeaturesPrevents Vocal PlosivesAnyone who has recorded vocal tracks knows what the sound of the letters p and b can do to the take when a microphone is left unprotected. This double-layered nylon screen dissipates the rush of air caused by vocal plosives, minimizing the popping sounds that can compromise your recording.Robust Vocal TracksBy minimizing vocal plosives, vocalists can move closer to the microphone and train their voices directly on the mic capsule for a more rich, centered, warm, and robust track.Protects Against Corrosive MoistureIn addition to protecting your take from vocal plosives, the PFNY-6 protects your mic capsule from corrosive moisture.Easy to AttachThe PFNY-6 is outfitted with a sturdy C-clamp that attaches easily to a mic stand or mic boom. Its thumbscrew fastener adjusts to most sizes, and the rubber grommet won’t scratch your mic stand’s finish.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628000858
Audio-Technica AT2035 Cardioid Condenser Microphone SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleElectret CondenserPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePad-10 dBHigh-Pass Filter80 Hz, 12 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL148 dB SPL (1 kHz, 1% THD)158 dB SPL (1 kHz, 1% THD, with Pad)Impedance120 OhmsSensitivity-33 dBV/PaDynamic Range136 dB (1 kHz, at Max SPL)Signal-to-Noise Ratio82 dB (1 kHz)Equivalent Noise Level12 dB SPL A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage11 to 52 V (Phantom Power)Operating Current Consumption3.8 mAPhysicalColorBlackMountingShockmount (Included)Included CasePouchIncluded FiltersNoneDimensions?: 2.05 x L: 6.69″ / ?: 5.21 x L: 16.99?cmWeight14.2?oz / 403?gPackaging InfoPackage Weight1.905 lbBox Dimensions (LxWxH)10.65 x 10.6 x 3.25″Audio-Technica ATH-M20x Closed-Back Monitor Headphones (Black) SpecsHeadphoneEarpiece DesignOver-Ear (Circumaural), Closed-BackEarpiece SwivelYes, 15¡ãEarpiece Connection / Wearing StyleHeadbandFoldableNoDriver TypeDynamicDriver Size1.6″ / 40?mmMagnet TypeNeodymiumVoice CoilCopper-Clad Aluminum WireImpedance47 OhmsActive Noise CancellationNoPerformanceFrequency Response15 Hz to 20 kHzSensitivity96 dBMaximum Power Handling700 mWWired ConnectivityAudio Connector to Source1 x 1/8″ / 3.5 mm TRS Male StraightAdapter (Included)1/4″ TRSCable DesignSingle-SidedAudio Connector to EarpieceNot Specified by ManufacturerCable Length9.8′ / 3?mCable ColorBlackPhysicalColorBlackWeight6.7?oz / 190?g (without Cable) Packaging InfoPackage Weight1.6 lbBox Dimensions (LxWxH)11.5 x 10.3 x 4.15″Senal XU-1648 XLR-USB Interface SpecsForm FactorInlineDisplayNoneChannels of I/O1 Input at 48 kHzMaximum Sampling Rate48 kHz / 16-BitNumber of Microphone Preamps1 PreampExpansion SlotsNoneGain/Trim RangeInputs:35 dB ConnectivityAnalog Audio I/O1 x XLR 3-Pin Mic Input1 x 1/8″ / 3.5 mm TRS Headphone OutputPhantom Power48 V ¡À 2 VPhantom Power Current15 mA per ChannelDigital Audio I/ONoneHost Connection / USBUSB Type-B (USB 2.0)USB (Non-Host)NoneSync I/ONoneNetwork I/ONoneMIDI I/ONoneWireless ConnectivityNonePerformanceFrequency Response25 Hz to 20 kHz Headphone Output Power50 mW into 16 OhmsImpedanceInputs:1.2 Kilohms Digital AudioSample Rates32 / 44.1 / 48 kHz (D/A Conversion) 8 / 11.025 / 16 / 22.05 / 32 / 44.1 / 48 kHz (A/D Conversion) Bit Depths16-BitMemory Card SlotNoneCompatibilityOS CompatibilityWindowsmacOSIncluded SoftwareNonePowerPower RequirementsUSB Bus PowerPower Consumption2.2 WPhysicalDimensions5.1 x 1.2 x 1.1″ / 13 x 3.1 x 2.8?cmWeight3.3?oz / 94.0?gPackaging InfoPackage Weight0.55 lbBox Dimensions (LxWxH)6.95 x 6.65 x 1.65″Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and Booms SpecsPhysicalFilter TypePop FilterFilter Size6″ / 15.24?cm DiameterAttachment StyleClamp with ScrewAdjustable HeightYesFilter MaterialNylonMaterial of ConstructionNylonLength13″ / 33?cm (Gooseneck)22″ / 55.9?cm (Total)Weight7.2?oz / 204?gPackaging InfoPackage Weight0.66 lbBox Dimensions (LxWxH)15 x 7.5 x 1.5″S
