Exclusive NT2-A DVD – available in the R?DE NT2-A Studio Solution KitNT2-A Studio VersatilityR?DE University – Recording Drums with the R?DE NT2-ACombining a true condenser capsule, three selectable polar patterns, and ultralow-noise circuitry, the Rode NT2-A large-diaphragm studio microphone offers a clear and smooth sonic signature along with versatile pickup responses, making it ideal for all sorts of voice and instrument sources at home or in the studio. Plus, its bundle of accessories¡ªshockmount, pop filter, XLR cable, and dust cover¡ªhelp the NT2-A serve vocalists, rappers, and voice-over artists especially well. With low noise being a top priority of the NT2-A, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (-5 or -10 dB) and high-pass filter (40 or 80 Hz) settings, which help avoid distortion and bass builup. Since it can run on 24 or 48 VDC phantom power, the NT2-A can be used with a variety of professional and entry-level XLR mic preamps.Large-Diaphragm True CondenserThis true condenser (externally biased) features a 1″ gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.Three Polar PatternsWith three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambience capture (omnidirectional recommended).Special VoicingThe frequency and transient response of this transducer has been voiced to complement today’s recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the ’50s and ’60s.Transformerless OutputThe transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.48V Phantom PowerThe NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.Accessory PackageThe accessory package includes a studio-grade shockmount with an integrated pop filter, a premium 20′ XLR mic cable, a dust cover, and a downloadable instructional video packed with recording tips.Features at a GlanceTrue condenser (externally biased)Large 1″ HF1 capsule with gold-sputtered diaphragmCardioid, figure-8, and omnidirectional polar patternsSelf-noise of only 7 dBATransformerless JFET active circuitryWide dynamic rangeXLR 3-pin output connectorRuns on phantom powerInternally shock-mounted capsuleIncludes SM6 shockmount, pop filter, and dust coverWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813000395
Rode NT2A SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.40?mmPolar PatternCardioid, Figure-8, OmnidirectionalPattern SelectionSwitched (Adjustable on Mic)OrientationSide AddressCircuitrySolid-State (JFET)Pad-5 dB-10 dBHigh-Pass Filter40 Hz 80 Hz Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, Pad, Polar PatternWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)Impedance200 OhmsSensitivity-36 dBV/Pa at 1 kHzOutput Level16 mV (Max, 1 kHz)Dynamic Range140 dBSignal-to-Noise Ratio87 dB A-WeightedEquivalent Noise Level7 dB SPL A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNoneCable Length20′ / 6.1?mPowerBus PowerNoneOperating Voltage24 V (Phantom Power)48 V (Phantom Power)PhysicalColorSilverMountingShockmount (Included)Included CaseMic SockIncluded FiltersPop FilterDimensions?: 2.2 x L: 8.2″ / ?: 55 x L: 209?mmWeight1.9?lb / 0.86?kgPackaging InfoPackage Weight5.445 lbBox Dimensions (LxWxH)15.4 x 10.7 x 5.1″S
