The DPA d:vote CORE 4099 Spare Mic is designed to match perfectly to your existing d:vote CORE 4099P or 4099A microphone. Those models are stereo pairs, matched to a sensitivity of ?¡À1 dB at 1 kHz. Should you need a spare mic to work in this stereo-pair arrangement, this mic will more than fit the bill.
Each Core 4099 microphone has a pre- Polarized condenser capsule with a supercardioid Polar pattern. Their 5.5″ goosenecks allow for a variety of positioning possibilities and terminate with a MicroDot connector
DPA Microphones 4099-DC-1-AP SpecsMicrophoneForm FactorGooseneckSound FieldMonoOperating PrinciplePressure GradientCapsuleElectret Condenser Polar PatternSupercardioidOrientationEnd AddressCircuitrySolid-StateHigh-Pass FilterNonePerformanceFrequency Range80 Hz to 15 kHz ¡À2 dB (at 7.9″ / 20?cm) Maximum SPL142 dB SPLImpedance35 Ohms ¡À 14%Sensitivity6 mV/Pa-44 dBV/PaDynamic Range108 dBSignal-to-Noise Ratio71 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL)Equivalent Noise Level23 dB A-Weighted (20 ¦ÌPa, Typical)26 dB A-Weighted (20 ¦ÌPa, Max)THD< 1% CMRR60 dBConnectivityOutput Connectors (Analog)1 x Microdot 3-PinCable Length5.9' / 1.8?mPowerOperating Voltage5 to 50 VOperating Current Consumption1.5 mAPhysicalColorBlackMountingInstrument Clamp (Included)Operating Temperature-40 to 113¡ãF / -40 to 45¡ãCOperating Humidity0 to 90%Dimensions?: 0.21 x L: 1.8" / ?: 5.4 x L: 45?mm (Microphone)L: 5.5" / L: 140?mm (Gooseneck)Weight0.95?oz / 27?gS