ETHOS – The Future of Broadcasting | Earthworks AudioA premium mic package for pro-level online personalities, podcasters, and YouTubers, this UNCUCO Kit features the stainless steel Earthworks ETHOS high-quality broadcast condenser microphone, a foam windscreen for breath/plosive control, and a two-section broadcast arm with an integrated XLR cable. Once set up in your room or studio, the kit can help you achieve the sleek on-camera look, robust vocal sound, and versatile mic positioning associated with professional broadcasters. Being a small-diaphragm condenser, the ETHOS requires less gain from preamps compared to typical dynamic broadcast mics, so it pairs well with most audio interfaces and mixers.Earthworks ETHOS Broadcast Condenser Microphone (Stainless Steel)Visually and sonically precise, the stainless steel Earthworks ETHOS is a broadcast condenser microphone built to impart a competitive, detailed quality to your voice for podcasts, narration, audiobooks, and more, helping it stand out in a world of speech-centric content. Like many mics that made Earthworks a big name, the ETHOS utilizes a small-diaphragm condenser capsule, which allows it to deliver nuanced and accurate vocal recordings with extended highs. While it is common for broadcast mics to have cardioid polar patterns, the ETHOS features a supercardioid response, enabling more focused capture of your voice with less background noise. The combination of low-noise circuitry and high SPL handling make it a strong performer, even in today’s demanding production standards. Whether hung from a boom arm or affixed to a mic stand, the supplied mount from Triad-Orbit lets you get optimal and stable mic placement without trouble.Voiced for Your VoiceHowever your voice sounds, the ETHOS is designed to faithfully capture it. You can be sure that the tone of your podcast, narration, commentary, or audiobook will be unmistakably you.The Detail of a CondenserThe ETHOS utilizes a small-diaphragm condenser capsule to ensure accuracy and revealing detail across its tonal spectrum.Extended BandwidthWith a frequency range of 20 Hz to 30 kHz, the ETHOS enables every element of your voice to be recorded clearly, with no loss of highs or lows.Focused PickupA supercardioid polar pattern allows the ETHOS to pick up primarily what’s in front of it (your voice) while rejecting much of the off-axis room reflections and background noise.Foam WindscreenBy reducing noise from breaths and wind, the supplied foam windscreen helps you achieve clean vocal recordings.Tech Details0.6″ small-diaphragm condenser capsuleUltrafast 11.67 microsecond rise timeSupercardioid polar pattern20 Hz to 30 kHz frequency range145 dB maximum SPL16 dBA self-noiseXLR 3-pin output connectorRequires 24 to 48 VDC phantom powerPro Mounting SystemIncluded with the ETHOS is a Triad-Orbit M2-R mount, a sturdy and versatile accessory that makes it easy to get the perfect mic placement with a boom arm or mic stand (available separately).WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 827517269221Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR CableThe Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It’s ideal for broadcast, voiceover, and podcasts. The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8″-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360¡ã, the BAI-2X allows for precise microphone placement. The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3″ thick. The C-clamp’s slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14″ riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.VersatileIdeal for studios as well as home useInternal SpringsInternal springs provide smooth, noise-free positioning and clean and sleek profileSturdySupports microphones up to 5 lb / 2.27kgCompatibilityThe 5/8″-27 standard microphone thread is compatible with most shockmounts and microphone clipsPrecisionExtends up to 40″ / 101.6cm and rotates 360¡ã allowing for precise microphone placementXLR CableThe integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transferExtra HeightA 14″ / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitorsCombo MountThe heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3″ / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws14″ RiserThe included riser adds 14″ / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitorsWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628578272
Earthworks ETHOS Broadcast Condenser Microphone (Stainless Steel) SpecsMicrophonePrimary ApplicationsStudio Recording, Broadcast, PodcastForm FactorStand/Boom MountIntended Sound SourcesSpeech/Voice OverSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm0.6″ / 14?mmPolar PatternSupercardioidOrientationEnd AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenFoam (Included)PerformanceFrequency Range20 Hz to 30 kHz Maximum SPL145 dB SPLOff-Axis Rejection2 dB at 60¡ã15 dB at 120¡ã25 dB at 180¡ãImpedance65 OhmsLoad Impedance600 OhmsSensitivity-34 dBV/PaSignal-to-Noise Ratio78 dB A-WeightedEquivalent Noise Level16 dB SPL A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage24 to 48 V (Phantom Power)Operating Current Consumption10 mAPhysicalColorStainless SteelMountingMic Clip/Stand Adapter (Included)Included CaseNoneIncluded FiltersNoneConstruction MaterialStainless SteelDimensions?: 2.25 x L: 6.9″ / ?: 5.71 x L: 17.5?cmWeight1?lb / 0.5?kgPackaging InfoPackage Weight2.59 lbBox Dimensions (LxWxH)9.3 x 8 x 4.5″Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable SpecsForm FactorStudio Microphone Arm with MountColorBlackTotal Reach40″ / 101.6?cmThread Size5/8″-27Riser Height14.00″ / 35.56?cmLoad Capacity5?lb / 2.27?kgIncluded CableIntegratedCable Length15′ / 457.2?cmAudio Connector TypeXLR 3-PinClamp Range2.3″ / 5.8?cmWeight4.47?lb / 2.02?kgPackaging InfoPackage Weight6.2 lbBox Dimensions (LxWxH)23.5 x 7.4 x 3.5″S
