Package 500W analog TV transmitter complete set include the 500W analog TV transmitter, slot antenna, 30meters coaxial cable. It is a economic complete package kit for TV station broadcasting.
500W TV Transmitter Overview:
Product introduction：This 500W TV Transmitter is a high-standard, broadcast-level all-solid-state Compact design analog TV transmitter.
Overview:
This 500W TV Transmitter is a high-standard, broadcast-level all-solid-state Compact design analog TV transmitter. It uses a new software radio technology to achieve the TV modulation function; the use of international high-quality LDMOS high-power field effect tube to achieve radio frequency amplification, the output power can be 500W.
The 500W TV transmitter is mainly composed of a TV modulation unit and an RF power amplification unit. Among them, the TV modulation unit uses the new FPGA + DDS to realize the software TV modulation function, while obtaining superior technical indicators while ensuring reliability and performance consistency; the RF power amplification unit uses international high-quality LDMOS high-power field effect transistors, Analog/Digital Compatible, stable and reliable.
The whole Transmitter adopts 19 “standard stainless steel case, suitable for all levels of TV stations.
Features:
● It adopts new FPGA + DDS technology to realize software-based TV modulation function, with superior performance, high reliability and good consistency.
● It adopts the integrated structure design, and the single-channel image sound combination type is easy to install and use.
● It has the functions of no video, excessive standing wave ratio, over power, over voltage, over current, and over temperature protection to reduce equipment damage.
● With intelligent network management and monitoring, with RS232 and TCP / IP communication interfaces.
● It’s using high-quality switching power supply, with over-voltage, over-current, under-voltage, over-temperature, short circuit, lightning protection and other protection measures, high efficiency, good voltage regulation range, strong ability to adapt to external power changes.
● It adopts high-quality high-flow axial flow fan, with good heat dissipation effect, keep the transmitter in a low temperature state, and extend the life of the transmitter.
500W/C2 Analog TV Transmitter
Technical Specifications:
Overall performances:
1. Operating frequency band: VHF / UHF
2. Image carrier frequency deviation: ± 300Hz
3. Output power: 500W
4. Output impedance: 50Ω
5. Inter-modulation distortion: ≤-50dB
6. Useless emission: ≤-50dB inside adjacent channels;
≤-65dB outside adjacent channels
7. RF output interface: 7/16” female
8. Power supply: single phase 220VAC / 110VAC
9. Cooling method: forced air cooling
10. Working environment temperature: -10～＋45 ℃
11. Dimensions: 483mm(width)x177mm(height)x650mm(depth)
12. Weight: 35Kg
Image performance:
1. Video input level: 1VP-P positive polarity
2. Video input impedance: 75Ω
3. Video in-band reflection loss: ≥35dB
4. Video input interface: BNC-K
5. Periodic clutter signal-to-noise ratio: ≥55dB
6. Continuous random wave SNR: ≥60dB (weighted),
≥55dB (un weighted)
7. Group delay: ± 30ns
8. 2T square wave distortion: ≤1%
9. Distortion of brightness waveform: ≤1.2%
10. Non-linear brightness distortion: ≤3%
11. Differential gain DG: ≤±3%
12. Differential phase DP: ≤±3 °
13. Color / bright gain difference: ≤1%
14. Color / bright delay difference: ± 5ns
15. Modulation degree: ≤87.5%
Sound performance:
1. Sound / image carrier power ratio: -10dB
2. Sound carrier frequency deviation: ± 200Hz
3. Audio input level: 0dBm ± 6dBm
4. Audio input impedance: 600Ω balanced or 10KΩ unbalanced
5. Audio input interface: XLR-K / BNC-K
6. Sound modulation capability: >±100KHz
7. FM signal-to-noise ratio: ≥70dB
8. Amplitude-frequency characteristic: ± 1dB
9. AM noise (no modulation): ≤-55dB
10. Internal carrier noise (100% modulation): ≤-50dB
11. Harmonic distortion: ≤0.3%
12. Maximum frequency deviation: ± 50KHz
13. Pre-emphasis time constant: 50us
Slot Television Antenna Overview:
●Frequency VHF/UHF
●High-gain design 13dBd-18dBd.
●Horizontal polarization suitable for high building concentration area coverage.
●Compatible mobile digital TV application.
●Omni-directional radiation field, it can be directional radiation according to requirements.
●It adopts quality electro silvering copper to reduce the high-frequency loss.
●Adopting anti-aging high-strength glass fiber reinforced plastics cover for tight seal and sheltering from rain and snow.
●To conduct zero point padding and lobe downwardness to achieve the best coverage effect.
●It occupies little space; flexible installation is suitable for spanning over the top of the tower or the side of the tower.
Complete Pakcage Include:
1pc 500W Analog TV Transmitter
1pc Slot TV Antenna
1pc 30meters 1/2″ coaxial cable with connectors
Reviews
There are no reviews yet.