Package 5KW analog TV transmitter complete set include the 5KW analog TV transmitter, slot antenna, 60meters coaxial cable. It is a professional complete package kit for TV station broadcasting.
5KW TV Transmitter Overview:
5KW Analog TV Transmitter（VHF）Modular Design
Product introduction：This 5KW Analog TV Transmitter is a high-standard, broadcast-grade cabinet-type all-solid-state analog TV transmitter with a modular structure, which is very convenient for maintenance.
5000W(VHF)/M2 Analog TV Transmitter
Overview:
This Transmitter is a high-standard, broadcast-grade cabinet-type all-solid-state analog TV transmitter with a modular structure, which is very convenient for maintenance. It uses a new software radio technology to achieve the TV modulation function; the use of international high-quality LDMOS high-power field effect tube to achieve RF amplification, the output power can be 5000W.
The TV transmitter is mainly composed of a TV modulation unit and an RF power amplification unit. Among them, the TV modulation unit uses the new FPGA + DDS to realize the software TV modulation function, while obtaining superior technical indicators while ensuring reliability and performance consistency; the RF power amplification unit uses international high-quality LDMOS high-power field effect transistors, Analog/Digital Compatible, stable and reliable.
The whole Transmitter adopts 19 “standard stainless steel case, suitable for all levels of TV stations.
Features:
● Analog TV exciter with new digital technology, superior performance, high reliability and good consistency.
● The main and backup exciter configurations can be used to reduce the stop rate (spare exciter and automatic switch are optional).
● With no video, over standing wave ratio, over power, over voltage, over current, over temperature and other protection functions to reduce equipment damage.
● Power control adopts closed-loop automatic gain control to ensure stable output power without drift.
● The power amplifier unit is composed of two independent 3000W power amplifiers. Each power amplifier uses three original imported high-quality long-life and large-volume axial fans in parallel, with large redundant air volume and good heat dissipation effect, so that the transmitter is in a low temperature state, which can extend the life of the transmitter.
● The 3000W power amplifier is installed in a 3U high 19-inch standard chassis, which is composed of four identical 750W power amplifier modules for low loss, high isolation and in-phase synthesis. The power redundancy design has a large margin and high reliability.
● The power amplifier module uses the latest high efficiency and high standing wave ratio LDMOS tube, adopts micro strip impedance conversion technology, simple and efficient, good consistency, easy maintenance and replacement.
● Using high-quality switching power supply, with over-voltage, over-current, under-voltage, over-temperature, short circuit, lightning protection and other protection measures, high efficiency, good voltage regulation range, strong ability to adapt to external power changes; and flexible N + 1 heat Plug-in configuration scheme, parallel current sharing centralized power supply. It can also be redundantly configured according to customer requirements.
● With intelligent network management and monitoring, with RS232 and TCP / IP communication interface.
5000W(VHF)/M2 Analog TV Transmitter Diagram
Technical Specifications:
Overall performances:
1. Operating frequency band: VHF / UHF
2. Image carrier frequency deviation: ± 300Hz
3. Output power: 5000W
4. Output impedance: 50Ω
5. Inter-modulation distortion: ≤-50dB
6. Useless emission: ≤-50dB inside adjacent channels;
≤-65dB outside adjacent channels
7. RF output interface: 1-5/8” Flange
8. Power supply: three phase 380VAC
9. Cooling method: forced air cooling
10. Working environment temperature: -10~+45℃
11. Dimensions: 570mm(width) x 1360mm(height) x 850mm(depth)
12. Weight: 180Kg
Image performance:
1. Video input level: 1VP-P positive polarity
2. Video input impedance: 75Ω
3. Video in-band reflection loss: ≥35dB
4. Video input interface: BNC-K
5. Periodic clutter signal-to-noise ratio: ≥55dB
6. Continuous random wave SNR: ≥60dB (weighted),
≥55dB (un weighted)
7. Group delay: ±30ns
8. 2T square wave distortion: ≤1%
9. Distortion of brightness waveform: ≤1.2%
10. Non-linear brightness distortion: ≤3%
11. Differential gain DG: ≤±3%
12. Differential phase DP: ≤±3°
13. Color / bright gain difference: ≤1%
14. Color / bright delay difference: ±5ns
15. Modulation degree: ≤87.5%
Sound performance:
1. Sound / image carrier power ratio: -10dB
2. Sound carrier frequency deviation: ±200Hz
3. Audio input level: 0dBm ± 6dBm
4. Audio input impedance: 600Ω balanced or 10KΩ unbalanced
5. Audio input interface: XLR-K / BNC-K
6. Sound modulation capability: >±100KHz
7. FM signal-to-noise ratio: ≥70dB
8. Amplitude-frequency characteristic: ± 1dB
9. AM noise (no modulation): ≤-55dB
10. Internal carrier noise (100% modulation): ≤-50dB
11. Harmonic distortion: ≤0.3%
12. Maximum frequency deviation: ±50KHz
13. Pre-emphasis time constant: 50us
Slot Television Antenna Overview:
●Frequency VHF/UHF
●High-gain design 13dBd-18dBd.
●Horizontal polarization suitable for high building concentration area coverage.
●Compatible mobile digital TV application.
●Omni-directional radiation field, it can be directional radiation according to requirements.
●It adopts quality electro silvering copper to reduce the high-frequency loss.
●Adopting anti-aging high-strength glass fiber reinforced plastics cover for tight seal and sheltering from rain and snow.
●To conduct zero point padding and lobe downwardness to achieve the best coverage effect.
●It occupies little space; flexible installation is suitable for spanning over the top of the tower or the side of the tower.
Complete Pakcage Include:
1pc 5KW Analog TV Transmitter
1pc Slot TV Antenna
1pc 60meters 1-5/8″ coaxial cable with connectors
Reviews
There are no reviews yet.