The sE Electronics X1 A is a medium-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording on a small budget, making it an attractive choice for a first mic or adding to an existing mic locker. The 2/3″ electret condenser capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power.The metal-bodied X1 A delivers a 20 Hz to 20 kHz frequency response along with low self-noise (16 dBA). Its selectable 100 Hz low-cut filter helps to reduce rumble and low-frequency buildup, and the switchable -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 A can handle a maximum SPL of 130 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.Based on the X1When it was introduced in 2011, the X1 brought a new level of quality to its price point, competing easily with microphones costing several times as much. But that didn’t stop sE from trying to outdo themselves again.
With a newly developed condenser capsule and an exterior based on the rugged metal chassis of the X1, the X1 A offers first-class sound and specifications at an even better “home studio” cost, featuring an extremely natural frequency response, massive SPL-handling capabilities (150 dB), switchable attenuation and low-cut filters, and a balanced sensitivity level. So, it’s at home on absolutely any source.Electret Condenser CapsuleThe X1 A utilizes a permanently biased 2/3″ condenser capsule with a cardioid polar pattern, making it well suited for anything from vocals and acoustic guitars to guitar amps and percussion.All-Metal Housing and Premium FinishUnlike the cheaply constructed bodies of many entry-level microphones, the X1 A’s all-metal chassis provides efficient rejection of any electrical interference and noise. Plus, the high-quality finish ensures a great look for years to come.Integrated WindscreenBy incorporating an integrated windscreen, the X1 A eliminates the need for an external pop filter while providing an extra layer of safety and security for the all-important capsule.New Acoustic DesignThe X1 A’s new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. The electronics have also undergone a complete overhaul, and exhibit better specifications and sound on and off the test bench.Attenuation and Low-Cut SwitchesThe -20 dB pad switch on the left provides extended dynamic range, enabling an array of applications and close-mic techniques for even the loudest instruments such as super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise, and compensates for excessive bass with close-mic techniques (proximity effect).Gold-Plated XLR ConnectorThe gold-plated XLR connector ensures a loss-free, reliable signal connection for years to come.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 819032011171
sE Electronics X1-A SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorStand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, Acoustic Guitar, Electric Guitar, Piano, Percussion, Cymbals, Overhead, InstrumentSound FieldMonoCapsule1 x CondenserDiaphragm0.7″ / 16.9?mm (Condenser)Polar PatternCardioidOrientationSide AddressCircuitrySolid-StatePad-20 dBHigh-Pass Filter100 Hz, 6 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenBuilt-InPerformanceFrequency Range20 Hz to 20 kHz Maximum SPL150 dB SPL (.5% THD, 1-Kilohm Load)Impedance50 OhmsLoad Impedance> 1 KilohmsSensitivity-34 dBVDynamic Range134 dB (with Pad)Signal-to-Noise Ratio78 dB A-WeightedEquivalent Noise Level16 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage48 V (Phantom Power)Operating Current Consumption4 mA (Phantom Power)PhysicalColorRedMountingMic Clip/Stand Adapter (with Included Hardware)Included CaseNoneIncluded FiltersNoneDimensions?: 2.3 x L: 6.7″ / ?: 58 x L: 169?mm (Microphone)Weight13.8?oz / 390?gPackaging InfoPackage Weight1.47 lbBox Dimensions (LxWxH)10.8 x 5.1 x 3.9″S
