The X1 A from sE Electronics is a versatile entry-level microphone with a small-diaphragm condenser element that can be used to record a wide variety of sources including vocals, percussion, electric and acoustic guitars, piano, and other instruments.Styled with a black grille and red chassis, the X1 A uses a 2/3″ electret-condenser diaphragm and completely redesigned electronic components to deliver high-quality results at a budget-friendly price. An optional 100 Hz high-pass filter with a 6 dB per octave slope can be engaged to filter-out low end; this is especially useful in reducing the proximity effect if the mic is placed very close to the sound source. The X1 A offers a 20 dB pad switch that allows the mic to handle even very loud sources, such as guitar amplifiers, at up to 150 dB SPL.Connection to a wide variety of professional gear is ensured through a durable gold-plated XLR connector, and 48V phantom power is required. A mic clip and thread adapter, allowing you to mount the X1 A to any standard microphone stand is included.Features at a GlanceVersatile entry-level studio microphone2.3″ electret-condenser capsuleCardioid pickup pattern for less background sound100 Hz high-pass filter20 dB pad allows mic to handle up to 150 dB SPLAll-metal housing with integrated windscreenWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 819032011980
sE Electronics X1-A SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorStand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, Acoustic Guitar, Electric Guitar, Piano, Percussion, Cymbals, Overhead, InstrumentSound FieldMonoCapsule1 x CondenserDiaphragm0.7″ / 16.9?mm (Condenser)Polar PatternCardioidOrientationSide AddressCircuitrySolid-StatePad-20 dBHigh-Pass Filter100 Hz, 6 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenBuilt-InPerformanceFrequency Range20 Hz to 20 kHz Maximum SPL150 dB SPL (.5% THD, 1-Kilohm Load)Impedance50 OhmsLoad Impedance> 1 KilohmsSensitivity-34 dBVDynamic Range134 dB (with Pad)Signal-to-Noise Ratio78 dB A-WeightedEquivalent Noise Level16 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage48 V (Phantom Power)Operating Current Consumption4 mA (Phantom Power)PhysicalColorWhiteMountingMic Clip/Stand Adapter (with Included Hardware)Included CaseNoneIncluded FiltersNoneDimensions?: 2.3 x L: 6.7″ / ?: 58 x L: 169?mm (Microphone)Weight13.8?oz / 390?gPackaging InfoPackage Weight1.48 lbBox Dimensions (LxWxH)10.9 x 5 x 3.9″S
