The SE Electronics X1 S Vocal Pack is a large-diaphragm condenser microphone and accessory package designed for quality vocal and podcast recording in project studios, home setups, and mobile rigs. It includes the X1 S cardioid studio condenser mic, a pop filter, shockmount, and a 10¡¯ microphone cable.The durable, metal-bodied X1 S features a handcrafted gold-sputtered capsule, wide frequency response and dynamic range, and a selectable 80 or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 or -20 dB pad minimizes distortion when miking loud sources. The mic can handle a maximum SPL of 140 dB (160 dB with the -20 dB pad engaged). It utilizes a gold-plated XLR 3-pin jack and requires 48 VDC phantom power. The included accessories aid in eliminating unwanted sounds from plosives and vibration.sE Electronics X1 S Large-Diaphragm Cardioid Condenser MicrophoneThe SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power. The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.The X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE’s capsule room by technicians with decades of experienceIts internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noiseThe -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniquesSelectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniquesThe X1 S’s all-metal chassis provides efficient rejection of electrical interference and noiseA gold-plated XLR connector ensures loss-free, reliable signal connectionWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 819032011188sE Electronics Isolation Pack – Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II SeriesThe sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.Pop shield features metal as opposed to a fabric shield for durabilityWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 819032010112
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone SpecsSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.40?mmCircuitrySolid-StatePad-10 dB-20 dBFrequency Range20 Hz to 20 kHz Maximum SPL140 dB SPLImpedance125 OhmsLoad Impedance1 KilohmsSensitivity30 mV/PaSignal-to-Noise Ratio85 dB Equivalent Noise Level9 dB A-WeightedOperating Current Consumption6 mAWeight15.7?oz / 445?gPackaging InfoPackage Weight1.6 lbBox Dimensions (LxWxH)10.6 x 5.1 x 3.9″sE Electronics Isolation Pack – Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series SpecsPackaging InfoPackage Weight0.45 lbBox Dimensions (LxWxH)12.2 x 7 x 4.1″S
