10KW High Power Complete FM Radio Station Package

This 10KW High Power Complete Radio Station Package is a very professional and good quality complete radio station set up and get you on the air to start broadcasting.

This 10KW FM radio station package include one high power 10KW FM transmitter, eight bay dipole antenna system, one 70M coaxial cable with connectors, one 12channel console mixer, two microphones, two BOP covers, two monitor headphones, one pair monitor speakers, two microphone stands, one audio processor, one DVD player, one telephone-hybrid.

Please note that we take any items out if it is still beyond your budget or we can add or replace any items to suit your specific needs.

10KW High Power FM Transmitter

● Redundant Large Power: 8pcs 1.5KW hot-plug RF Amplifier modules combined high efficiently; Maximum Output Power is 11KW. It uses the new high-efficiency LDMOS Transistors, the full RF output power can reach 70%.
● Redundant Power Supply: 4pcs 5000VA switched power supply modules are working in parallel. It can provide large redundant power capacity.
● High-performance Low Pass Filter which can minimize unwanted emission.
● Output Power Stable: Total output power is extremely stable by AGC (Automatic Gain Control). Ensure the output power would not change with the boot time and ambient temperature, power stability is less than 10W.
● Dual-Exciter: Two exciters (DSP+DDS) with automatically changeover switcher, increase entire transmitter stability.
● Analog and Digital (AES/EBU) audio signal input directly; Hearing similar to CD.
● Intelligent protection functions by centre control module, like Over Forward Power, Over SWR, Over Temperature, Over Voltage, Over Current. It can adjust output power intelligent, keep the maximum safe output power and keep fault not expanding.
● Best lightning protection: high quality lightning protection SPD fromGermanyfor the whole power supply.
● Real Hot-Plug structure: the Amplifier modules and Power Supply modules can be repairing at non-stop condition in any case.
● Timing automatically adjusts the output power: After setting, the transmitter can automatically adjust the output power at different times of the day, convenient for economical radio broadcasting.
● Advanced Remote Telemetry Interface: RS232/RS485 or TCP/IP Internet Communication interface is ready for remote control system which can read all detail parameters from transmitter.
1. RF frequency range 87MHz～108MHz
(other frequencies can be customized), stepping 10kHz
2. Output power 0~10000W continuously adjustable
3. RF Output Interface: 3-1/8′ Flange
4. Temperature range -5 ℃ ～ + 45 ℃
5. Chassis dimensions 19 inches
wide (850mm) × height (1970mm) × depth (1200mm)
6. Transmitter weight 550kg

Eight Bay Dipole Antenna

Complete package 8-bay dipole FM antenna and accessories for 20KW composed by: 8pcs stainless dipole FM antennas – Wide Band, 8-way power splitter, 8pcs dividing cables and connectors. The polarization is vertical. It made up of high quality stainless steel and high quality copper. Package 8-Bay dipole FM antenna system is suitable for high gain situation.
* All FM bandwith
* Vertical polarization
* High gain
* 304 stainless steel material
* DC grouding lightning protection
1.Frequency Range: 88.0MHz～108.0MHz
2.Gain: 11dBd
3.Input Power: 5KW/10KW /20KW
4. Impedance: 50Ω
5.VSWR: <1.10(specified frequency)
<1.25 (all FM band)
6.RF Intput connector: 1-5/8 for 5KW
3-1/8 for 10KW / 20KW
7.Wind Load: 32kg.150km/h
8.Weight: 125KG

70meters 1-5/8″ coaxial cable with connectors

BEHRINGER Xenyx QX1202USB Mixer

Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and Compressors, British EQs, Klark Teknik Multi-FX Processor and USB/Audio Interface

4 microphone inputs with 48-volt phantom power, compressor, 3-band EQ and peak LEDs 1 AUX post-fader 4 stereo inputs Internal Klark Teknik multi-effect device 2 Track inputs and outputs Master fader USB audio interface Dimensions (H x W x D): 50 x 250 x 248 mm External power supply.

Along with their built-in USB/audio interfaces, the QX1202USB comes with all the recording and editing software needed to turn your computer system into a complete, high-performance home recording studio.

AKG Monitor Headphone

Headphones
Closed
Circumaural
Impedance: 32 Ohm
Sensitivity: 110 dB SPL/V
Frequency range: 18-20000 Hz
Max. input level: 200 mW
2.5 m Cable with 3.5 mm jack and 6.3 mm adapter
Weight: 200 g

EDIFIER Monitor Speaker

2-Way Digital Monitors deal for computer studios, audio and multimedia workstations True bi-amping mode with 4 amplifiers – 2 per speaker 150 W digital power amplification 1″” Silk dome tweeter Long-excursion 5″” woofer Frequency range: 55 – 20000 Hz Maximum SPL: 100 dB @ 1 m Advanced Waveguide Technology for extra big sweet spot Setting options for room adjustment USB input for direct connection to a computer (plug and play, no driver required) Two analogue inputs with XLR and TRS connections – can be used simultaneously with a digital signal source Plastic housing Dimensions: 254 x 204 x 178 mm Weight: 6.5 kg 2 m speaker cable included

COMPOSER PRO-XL MDX2600 V2

The reference-class MDX2600 is a marvelous dual-channel Expander/Gate/Compressor/Peak Limiter that is ideal for: compressing mono/stereo signals and providing virtually inaudible noise suppression, without loss of high frequencies; increasing vocal presence and energy; and limiting, or smoothing out extremely-high signal peaks. Additionally, the MDX2600 features an integrated Dynamic Enhancer, De-Esser, Low-Contour filter and our revolutionary, switchable Tube simulation – for the extra warmth and transparency of classic tube circuitry. Put simply, the MDX2600 can do amazing things for your vocals or instruments – providing virtually everything you need for studio-quality dynamics processing!

Studio Microphone

It is a professional wide-diaphragm condenser mic with and internal 6dB 100hz low frequency roll off switch and very cute shape. It characters with high sensitivity, low noise, wide frequency response and high SPL handling as well, thus make it ideal for on-stage performance, instrument and vocal recording. It is perfect for broadcasting and sound performance. Besides, it is also the better choice for those music fans and home-recorders.

High Performance FET Condenser MIC
1、High-SPL capability
2、Extended frequency response
3、Exceptionally wide dynamic range
4、Pure and realistic sound quality

iSK Microphone Stand

Adjustable to any position
4 outbuilt springs
Horizontal or vertical installation
Hollow beam enable cable go through inside
Stable design of 2 tubes lower section and 2 tubes upside
5*2.5M double shield mic cale with metal connector
ASD-40 mic arm has a wide recording range
Can be widely used for personal recording podcast etc

Height can be adjusted;
The stand can be fixed or locked on the table;
Can be clamped on the table
Microphone Scissor Arm

BOP Cover

* Large double filter

* Broadcast Recording

* Microphone BOP cover

DVD CD Player

High-grade aluminum 1.5U black brushed panel, rack-mounted, beautiful and generous. It has the function of automatic playback of incoming calls.
Compatible with DVD, VCD, CD, MP3, SVCD, MPEG4 and other format discs. System + ESS decoding scheme, super error correction function.
It comes with an MP3 reader, which can be inserted into a U disk for playback. With HI-FI digital audio (optical coaxial) output interface.
With high-definition video output interface.
Leisure infrared red long-distance full-function remote control.
Wiring DVD player integrated amplifier.
Stereo DVD Player AP-CD12 1O
Audio output: 0.775V ± 0.2V (output impedance 600 ohms)
Video output: 0.775V ± 0.2V (output impedance 75 ohms)
Distortion plus noise: ≤-60dB
Audio signal to noise ratio: ≥80dB
Frequency response: 20Hz~18KHz power cord: (2×0.5mm3)X1.5m (standard)
power supply: AC 220V±10% 50-60Hz
power consumption
10~15W machine size: 51(H)X483(W)×250(D)mm
net weight: 2.7kg
Gross weight: 3.8kg

Telephone-Hybrid

This product is a professional hotline telephone hybrid coupler. It is specially used by various radio stations and TV stations in live broadcast programs, and is also suitable for conference calls, telephone recordings and other occasions.

Provides four-way telephone access, adopts microcomputer chip and electronic switch technology, each control is independent of each other, the switch-in and switch-out operation is convenient and flexible, and four-way telephone access can be realized at the same time. It can be used to make multi-party calls and free conversations, and can also hold calls and talk separately.

It provides audio and control interfaces for the main and backup live studios. Users only need to add a control box and corresponding control cable to realize the time-sharing of a set of hotline devices between the two live studios.

Each channel is equipped with a sidetone adjustment switch, which can obtain better phone quality and avoid harmful sound feedback.

There are built-in communication devices in the director and host control box, including microphones and speakers (the host can switch the call output to the mixer or headset splitter), and there is a call button, which makes internal calls very convenient.

When there is only one host, the no-director function can be used, as long as the no-director switch on the front panel of the host is turned on (the indicator light is off at this time)