AKG Project Studio Line microphones outlineAKG Perception studio condenser microphones P120, P170, P220, P420, P820 – ‘I can fly’Ideal for recording vocals, narration, and voice-overs in a home or project studio that lacks acoustic treatment, this UNCUCO Kit includes the black AKG P220 large-diaphragm cardioid condenser microphone, a shockmount, closed-back studio monitor headphones, a studio reflection filter with a tripod mic stand, a pop filter, a balanced XLR microphone cable, and a metal carrying case.
The P220 microphone features a 1″ gold-sputtered large diaphragm, extremely high SPL handling, pad and low-cut filter switches, and effective rejection of off-axis sound. Set up the reflection filter behind the mic to reduce room reflections and position the pop filter in front of the mic to control vocal plosives. The closed-back headphones produce a full-range frequency response and provide optimal isolation from ambient sound while remaining comfortable.AKG P220 Large-Diaphragm Cardioid Condenser Microphone (Black)Boasting even higher SPL handling and lower self-noise than the P120, the black AKG P220 large-diaphragm condenser microphone is poised to give clear, distortion-free sound on a budget, whether you record vocals at home or mic up blaring guitar cabs and explosive drums on stage. This side-address mic sports a rugged all-metal body that not only bolsters durability, but also aids in rejecting RF interference from sources such as wireless systems. It comes with a spider-type shockmount to isolate the mic from vibration noise and a metal carrying case for safe transport.
The true condenser capsule of the P220 utilizes a 1″ gold-sputtered diaphragm tuned to yield a detailed sound with slight rises in high and low frequencies. Plus, it is capable of handling SPLs up to 155 dB (-20 pad on) without audible distortion, so it’ll have no problem taking on drums and guitar amps. A low-cut filter at 300 Hz can be engaged to help reduce rumble, wind noise, or even bass buildup from up-close miking. Stage bleed and background noise are attenuated by the mic’s cardioid polar pattern, which is most sensitive to sound in front of the microphone. Use a separately available XLR cable to connect the P220 to an XLR mic input that can supply 48V phantom power.Cardioid Polar PatternThis side-address microphone is most sensitive to sounds arriving in front of it while picking up much less of sounds arriving from the sides or rear (from monitor speakers or neighboring instruments). This makes the microphone equally suited for recording and onstage use.Gold-Sputtered Large DiaphragmThe P220 features a true condenser capsule design. Its 1″ large diaphragm is made of a plastic foil that is gold-sputtered on one side only to prevent shorting to the back electrode even at extremely high sound pressure levels.All-Metal BodyThe all-metal body adds to the rejection of RF interference so you can use the microphone near transmitter stations and along with wireless microphones or other communications equipment. The extremely rugged, heavy body and sturdy front grille protect the microphone from damage from tough handling on stage.High Headroom and Minimum DistortionCapable of handling sound pressure levels up to 155 dB without introducing perceptible distortion and built to resist high temperatures and humidity, the microphone will give excellent results in a wide range of applications.Bass-Cut FilterSelector 1 on the microphone front further reduces low-end distortion caused by footfall, wind noise, and air conditioning rumble. The filter also minimizes the proximity effect that close-in miking from less than 4″ causes in any unidirectional microphone. The filter rolls off at 12 dB/octave from 300 Hz downward.Switchable PadSelector 2 on the microphone front lets you increase the headroom by 20 dB for distortion-free recording up close. The pre-attenuation pad prevents the microphone’s output level,
particularly at low frequencies, from overloading the miniature transformers used in many mixer input stages, etc.Connecting to Audio EquipmentThe P220 uses a condenser transducer designed for 48V phantom powering from a source such as an external mic preamp, an audio interface, or a mixing console. It provides a balanced output on an XLR 3-pin male connector; use an XLR cable (available separately) to connect the microphone to a balanced XLR input with phantom power.Shockmount and Metal CaseIncluded with the P220 are a spider-type shockmount and a metal carrying case. The shockmount absorbs vibrations, which aids in isolating the mic from stand handling noise and foot noise.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 885038037057Auray RF-CM-S Reflection Filter (Silver)The silver RF-CM-S Reflection Filter from Auray is the perfect solution for recording vocalists or voice over artists in less than stellar acoustic spaces where room reflection would otherwise be recorded along with the vocal, making post processing and mixing more complicated. This might be in a home studio, an untreated rehearsal space, or a makeshift film dialogue replacement situation. Housed in a deep and sturdy, semicircular perforated aluminum shell, the high density acoustic foam provides a reflection free environment for the microphone, while simultaneously attenuating any room noise. The resulting dry and clearer recordings can then be treated during mixing or film post processing without extraneous noises or unwanted reflections getting in the way. The filter mounts onto a microphone stand, and front and rear sliding brackets easily allow you to adjust its height and depth for precise microphone placement. Standard 5/8″-27 threaded adapters fit most microphone stands, clips and shockmounts.Compact solution for providing sound isolation for vocal or voice over recording in untreated spacesHigh-density foam absorbs acoustic reflections and minimizes room ambience, isolating the microphonePerforated aluminum shield diffuses and prevents sound that might reflect back to microphone, especially when recording loud vocalistsSliding bracket makes it easy to mount the microphone in the ideal position inside the reflection filterRear adjustable bracket provides additional filter height adjustment to accommodate different vocalist heightsAdapters with industry-standard 5/8″-27 threaded studs and sockets are compatible with mic stands, shock mounts, and mic clips with a 5/8″-27 post.Deep, semi-circular design ensures dry vocals while attenuating external noiseWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628578630Auray RFMS-580 Reflection Filter Tripod Mic StandThe RFMS-580 Reflection Filter Tripod Mic Stand from Auray features heavy-duty steel construction and is capable of providing sturdy support to your reflection filter and studio microphone at the same time. The tripod stand design features collapsible legs for convenient storage, a telescoping center column that can be adjusted to reach a maximum working height of 68″.
The stand also features nonslip feet for added traction on hard surfaces as well as a 5/8″ threaded adapter for attaching a shockmount or mic clip.Provides sturdy support to a microphone and a reflection filter at the same timeMay also be used as a speaker stand (may require 3/8″ thread adapter)WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628576827Polsen HPC-A30-MK2 Closed-Back Studio Monitor HeadphonesThe HPC-A30-MK2 Closed-Back Studio Monitor Headphones from Polsen offer a solution for experiencing rich and natural sound when listening to music through a mobile device or monitoring a podcast on your computer. These headphones can also be used for DJ work, thanks to the swiveling earcups that let you monitor audio while keeping one ear free.
The HPC-A30-MK2’s over-ear design isolates the sound and prevents leakage for optimum listening conditions in loud environments, such as a club or on the go. The 10′ cable also gives you the freedom to move around while working and terminates in a 1/8″ TRS stereo plug, which is compatible with most mobile devices and computers. In addition, a stereo 1/4″ adapter is included to plug into a stereo or mixing board.MobileThe HPC-A30-MK2 headphones deliver a rich sound for listening to audio on a mobile device. Whether you’re listening on a smartphone, an iPod, or a tablet, these headphones deliver detailed sound even in noisy environments.Over-Ear DesignThe over-ear design isolates sound in loud environments and prevents leakage for optimum listening conditions. This design is good for listening to music on a busy street, and for DJs who need to monitor their audio in a noisy club.DJ ApplicationsThe headphones are suitable for DJ applications and include a tuned bass response for low-end clarity. The pivoting earcups are ideal for one-ear or on-the-shoulder monitoring. A padded headband offers to keep you comfortable during a lengthy session.Broadcast and PodcastThe headphones allow for monitoring audio on a laptop or in a home studio as well as recording a vlog on a smartphone.Swiveling and Rotating EarcupsIf you’re a DJ who likes to keep one ear free, you can swivel one of the earcups for on-the-shoulder monitoring. The earcups also rotate 90¡ã so you can turn one of the earcup outward for one-ear handheld monitoring.10′ CableA headphone cable that’s too short is almost like sitting on the sidelines¡ªyou can’t be part of the action. If you need to move around while you work, the 10′ cable will allow you to move about freely.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628021563Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and BoomsDesigned for use with microphones, the Auray PFNY-6 is a pop filter that minimizes vocal plosives and reduces errant breath noise. It’s suitable for home and pro studios alike and lends itself to all sorts of recording applications including vocals, voiceovers, broadcasts, and podcasts.The PFNY-6 utilizes a double-layered nylon screen, affording a clear view of the capsule, so the PFNY-6 won’t impede a vocalist from giving a robust-sounding performance, captured on-axis. Additionally, this screen protects your microphone capsule from corrosive moisture.Its 13″ flexible gooseneck will give you plenty of room to maneuver, allowing you to place the screen as close to the capsule as you’d like. A sturdy C-clamp with a thumbscrew fastener protects against slippage, while a rubber grommet and padding protect your mic stand’s finish.General FeaturesPrevents Vocal PlosivesAnyone who has recorded vocal tracks knows what the sound of the letters p and b can do to the take when a microphone is left unprotected. This double-layered nylon screen dissipates the rush of air caused by vocal plosives, minimizing the popping sounds that can compromise your recording.Robust Vocal TracksBy minimizing vocal plosives, vocalists can move closer to the microphone and train their voices directly on the mic capsule for a more rich, centered, warm, and robust track.Protects Against Corrosive MoistureIn addition to protecting your take from vocal plosives, the PFNY-6 protects your mic capsule from corrosive moisture.Easy to AttachThe PFNY-6 is outfitted with a sturdy C-clamp that attaches easily to a mic stand or mic boom. Its thumbscrew fastener adjusts to most sizes, and the rubber grommet won’t scratch your mic stand’s finish.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628000858Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable (10′, Black)The black Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (10′) is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable’s color-coding affords the ability to quickly differentiate between multiple connections on stage, it provides a pleasant aesthetic quality at the same time.Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that’s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.95% dual-spiral shielding offers protection from EMI and RFI noiseTwin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable’s signal from radiating and affecting nearby cables and helps prevents external EMI from penetrating to the cable’s core24-AWG oxygen-free stranded copper inner core provides the best possible conductivityCotton yarn reduces electrostatic and microphonic noiseAll solder points shrink-wrapped for protectionNeutrik XX silver connectors offer high conductivityCaged type contact and improved ground contactWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628558274
AKG P220 Large-Diaphragm Cardioid Condenser Microphone (Black) SpecsMicrophonePrimary ApplicationsLive Sound, Studio Recording, BroadcastForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.4?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePad-20 dBHigh-Pass Filter300 Hz, 12 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL135 dB SPL155 dB SPL (with Pad)Off-Axis Rejection3 dB at 60¡ã12 dB at 120¡ã20 dB at 180¡ãImpedance200 OhmsLoad Impedance¡Ý 1000 OhmsSensitivity-34 dBVSignal-to-Noise Ratio78 dB A-WeightedEquivalent Noise Level16 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage48 V ¡À 4 V (Phantom Power)Operating Current Consumption3 mAPhysicalColorBlackMountingShockmount (Included)Included CaseHard CaseIncluded FiltersNoneConstruction MaterialMetalOperating Temperature22 to 92¡ãF / -10 to 60¡ãCDimensions?: 2.1 x L: 6.5″ / ?: 5.4 x L: 16.5?cmWeight1.17?lb / 0.53?kgPackaging InfoPackage Weight4.055 lbBox Dimensions (LxWxH)9.35 x 9.15 x 5.3″Auray RF-CM-S Reflection Filter (Silver) SpecsFilter TypeReflection FilterAdjustable Height12.00 to 18.00″ / 30.5 to 45.7?cmFilter MaterialFoam, MetalDimensions19.8 x 11.0 x 12.0″ / 50.0 x 28.0 x 31.0?cmWeight4.45?lb / 2?kg (with Mount)Packaging InfoPackage Weight7.5 lbBox Dimensions (LxWxH)20 x 13 x 11″Auray RFMS-580 Reflection Filter Tripod Mic Stand SpecsStandHeight42 to 68″ / 106.68 to 172.72?cmCollapsed Size35.2″ / 89.41?cmGeneralWeight5.2?lb / 2.36?kgPackaging InfoPackage Weight5.8 lbBox Dimensions (LxWxH)35.75 x 5 x 4.25″Polsen HPC-A30-MK2 Closed-Back Studio Monitor Headphones SpecsHeadphoneEarpiece DesignOver-Ear (Circumaural), Closed-BackEarpiece Connection / Wearing StyleHeadbandFoldableNoDriver TypeDynamicDriver Size2″ / 50.80?mmMagnet TypeNeodymiumImpedance32 OhmsActive Noise CancellationNoPerformanceFrequency Response20 Hz to 20 kHz (Wired)Sensitivity102 dBMaximum Power Handling300 mWOutput Power15?mWTotal Harmonic Distortion (THD)0.25%Wired ConnectivityAudio Connector to Source1 x 1/8″ / 3.5 mm TRS MaleAdapter (Included)1/4″ TRSAudio Connector to EarpieceNot Specified by ManufacturerCable Length10′ / 3.05?mCable ColorBlackPhysicalWeight10.2?oz / 289.2?g Packaging InfoPackage Weight1.21 lbBox Dimensions (LxWxH)9.65 x 8.95 x 3.85″Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and Booms SpecsPhysicalFilter TypePop FilterFilter Size6″ / 15.24?cm DiameterAttachment StyleClamp with ScrewAdjustable HeightYesFilter MaterialNylonMaterial of ConstructionNylonLength13″ / 33?cm (Gooseneck)22″ / 55.9?cm (Total)Weight7.2?oz / 204?gPackaging InfoPackage Weight0.66 lbBox Dimensions (LxWxH)15 x 7.5 x 1.5″Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable (10′, Black) SpecsCable Length10’ / 3?mShielding95% SpiralWire Gauge24 AWGContact PlatingSilverPackaging InfoPackage Weight0.5 lbBox Dimensions (LxWxH)9.45 x 7.65 x 0.95″S
