Micaela Kingslight performing “Everyone Knows” using the Audix A131 and A133 studio condenser micsDue to its clever design elements, the Audix A131 large-diaphragm condenser microphone lets you clearly capture varied sources such as vocals and acoustic instruments without relying on an external shockmount and pop filter to control extraneous noises. Its internal shockmount handles the task of reducing vibrations while the grille and underlying foam provide resistance to pops or plosives.
The electret condenser capsule features a 1.1″ gold-sputtered diaphragm and a cardioid polar pattern, yielding versatile and full-range frequency reproduction along with off-axis sound rejection that helps to lessen the pickup of room ambience and stage bleed. With a precision-machined aluminum body, this mic is built to survive the rigors of daily session use or life on tour.Versatile ApplicationsThe A131 is a large-diaphragm condenser microphone ideal for vocals, choir, piano, acoustic instruments, and overheads. Featuring a contemporary, compact design, the A131 is an ideal choice for podcasting, professional audio production, studios, and live stage performances.Electret Condenser CapsuleHoused in a precision-machined aluminum body, the 33mm fixed-charge capsule features a gold-sputtered diaphragm for wide, natural frequency response. With its well-behaved cardioid polar pattern, the A131 faithfully captures the detail of the performance while rejecting room noises and other unwanted, off-axis sounds.Resistant to PopsA double woven steel mesh grille and ultra-thin acoustic foam offer exceptional pop resistance for podcasting and vocals. Behind the grille, the open-air design of the capsule mounting system allows the A131 to deliver transparent, uncolored sound.Consistent PerformanceProprietary impedance control between the capsule and circuitry ensures consistent and reliable performance across a wide range of environments.Internal ShockmountA unique and highly effective internal shockmount isolates the capsule from mechanical vibrations and touch noise, eliminating the need for a bulky external shockmount.For Studio or StageOffering studio performance in a road-worthy package, the A131 also comes with a protective zippered carrying case.Phantom PoweredThe A131 features a balanced XLR 3-pin output and requires 48 to 52 VDC phantom power. For best results, the A131 should be used with a high-quality mic preamplifier and microphone cable.Made in the USAThe A131 was designed, machined, assembled, and tested in the USA.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 687471241264
Audix A131 SpecsMicrophonePrimary ApplicationsLive Sound, Studio Recording, PodcastForm FactorStand/Boom MountIntended Sound SourcesVocals, Piano, Overhead, Instrument, ChoirSound FieldMonoOperating PrinciplePressure GradientCapsuleElectret CondenserDiaphragm1.1″ / 29?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsNoneWindscreenBuilt-InPerformanceFrequency Range40 Hz to 20 kHz Maximum SPL140 dB SPLOff-Axis Rejection3 dB at 60¡ã18 dB at 120¡ã15 dB at 180¡ãImpedance150 OhmsSensitivity23 mV/Pa at 1 kHzDynamic Range130 dBSignal-to-Noise Ratio84 dB Equivalent Noise Level10 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage48 V ¡À 4 V (Phantom Power)PhysicalColorBlackMountingMic Clip/Stand Adapter (Included)Included CaseZipper PouchIncluded FiltersNoneConstruction MaterialAluminum, Steel Wire GrilleDimensions?: 2.1 x L: 5.4″ / ?: 54.5 x L: 136?mmWeight10?oz / 284?gS
