The CK-40 Stereo Multi-Pattern FET Microphone from Avantone is designed to produce clear stereo recordings of vocals, instruments, ensembles, and ambiance. The CK-40 features a red finish, consistent with Avantone’s Cabernet (C-series) microphone line. Twin large 35mm capsules are mounted vertically, and the top capsule can be rotated up to 180¡ã for flexible positioning. There are switchable omnidirectional, cardioid and figure 8 polar patterns, which can be independently selected. These positioning options allow for Blumlein, X/Y, and M-S stereo recording techniques. An 80 Hz high-pass filter and -10 dB pad can be individually assigned for additional flexibility. Included in the package is a shockmount, a foam wind filter, a 30′ 5-pin XLR cable, a 5-pin XLR to dual 3-pin XLR breakout box, a wooden case, and a metal travel case.Twin 35mm center-terminated pressure gradient transducersTight vertical array of transducers enables accurate stereo imaging without phase issuesIndividually selectable cardioid, omnidirectional, and figure-8 polar patternsThe top capsule/grill assembly rotates up to 180¡ã relative to the lower capsule/grill assemblyTwo sets of pad, pattern select, and low frequency roll-off switches independently control the capsulesCustom retro shockmount allows precise positioning of the mic while inhibiting the transfer of unwanted vibrationsWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 852437001118
Avantone Pro CK-40 SpecsMicrophoneCapsuleCondenserDiaphragm1.38″ / 35.0?mmPolar PatternCardioid, Figure-8, OmnidirectionalPattern SelectionSwitchedPad-10 dBHigh-Pass Filter80 Hz, 6 dB/Octave PerformanceFrequency Range20 Hz to 20 kHz Maximum SPL147 dB SPLImpedance250 OhmsSensitivity-40 dBSignal-to-Noise Ratio77 dB Equivalent Noise Level17 dB A-WeightedTHD0.5% ConnectivityOutput Connectors (Analog)1 x XLR 5-PinCable Length30′ / 9.1?mPowerOperating Voltage48 VOperating Current Consumption3.0 ¦ÌAPhysicalDimensions?: 1.93 x L: 10.87″ / ?: 49 x L: 276.1?mmWeight2.1?lb / 0.95?kgPackaging InfoPackage Weight12.05 lbBox Dimensions (LxWxH)20.1 x 17.1 x 6.9″S