R?DE University – Recording Vocals with the R?DE NT2000R?DE University – Recording Guitars with the R?DE NT2000Combining a true condenser capsule, continuously variable polar pattern control, and ultralow-noise circuitry, the Rode NT2000 large-diaphragm studio microphone offers pro-level sonic performance along with extremely versatile pickup responses, making it ideal for capturing all sorts of voice and instrument sources, and for experimenting with the balance of direct and room sound. Plus, it includes a vibration-inhibiting shockmount and a hard shell carry case, so it is truly studio- and travel-ready.
With low noise being a top priority of the NT2000, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (variable from 0 to -10 dB) and high-pass filter (variable from 20 to 150 Hz) settings, which help avoid distortion and bass buildup. Since it can run on 24 or 48 VDC phantom power, the NT2000 can be used with a variety of professional and entry-level XLR mic preamps.Large-Diaphragm True CondenserThis true condenser (externally biased) features a 1″ gold-sputtered, dual-diaphragm capsule that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.Variable Polar PatternThe NT2000’s polar pattern is continuously variable from omnidirectional to cardioid to figure-8. As a result, the NT2000 offers excellent versatility for single-source close miking, dual-source pickup, room ambience capture, and more.Variable PadThe pad, which reduces the input level to the microphone’s in-built preamp, can be continuously adjusted from 0 to -10 dB. This is very useful when recording loud sound sources (such as close miking of drums or amplifiers) to avoid overloading the microphone’s preamplifier.Variable High-Pass FilterChoose any setting between 20 and 150 Hz to cut the level of the selected frequency
and below by 3 dB. This control is useful for selecting the cut-off point for potentially offending low frequencies such as traffic noise and floor vibrations. It can also be used on vocals to achieve a limited response for a “different” sound.Transformerless OutputThe transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.48V Phantom PowerThe NT2000 operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.Shockmount and CaseThe NT2000’s accessory package includes a studio-grade shockmount that reduces stand-borne vibration and a hard shell carry case.Features at a GlanceTrue condenser (externally biased)Large 1″ HF1 capsule with gold-sputtered dual diaphragmsPolar pattern is continuously variable between omnidirectional, cardioid, and figure-8Continuously variable pad and high-pass filterSelf-noise of only 7 dBATransformerless JFET active circuitryWide dynamic rangeXLR 3-pin output connectorRuns on phantom powerHigh-strength welded and heat-treated steel mesh headInternally shock-mounted capsuleIncludes SM2 shockmount and hard shell carry caseWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813000029
Rode NT2000 SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Speech/Voice Over, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.40?mmPolar PatternCardioid, Figure-8, OmnidirectionalPattern SelectionContinuously Variable (Adjustable on Mic)OrientationSide AddressCircuitrySolid-State (JFET)Pad-10 dBHigh-Pass Filter150 Hz, 3 dB/Octave 20 Hz, 3 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, Pad, Polar PatternWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)Impedance200 OhmsSensitivity-36 dBV/Pa at 1 kHzOutput Level15 mV (Max, 1 kHz)Dynamic Range140 dBSignal-to-Noise Ratio87 dB SPL (1 kHz)Equivalent Noise Level7 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage24 V (Phantom Power)48 V (Phantom Power)PhysicalColorSilverMountingShockmount (Included)Included CaseHard CaseIncluded FiltersNoneDimensions?: 2.2 x L: 8.2″ / ?: 55 x L: 208?mmWeight1.8?lb / 831?gPackaging InfoPackage Weight6.05 lbBox Dimensions (LxWxH)16 x 13 x 6.4″S
