Record, Edit, Master & Rock out w/Senal Studio Monitor HeadphonesKSM32/SL Project-Studio Vocal SolutionFeaturing integral pop protection and shock-mounting plus a large-diaphragm true condenser capsule and transparent Class-A circuitry, the charcoal gray Shure KSM32/CG microphone is built to deliver excellent transient response and neutral tone in the studio or on stage. Its flat frequency response and selectable settings¡ªtwo low-cut filter options and a -15 dB pad¡ªmake the KSM32/CG honest and versatile, so it can be used on anything from vocals and guitars to drums and piano. The CG model comes with a ShureLock stand mount and zippered storage bag. The uniform cardioid polar pattern of the KSM32/CG helps reduce the capture of stage bleed and background noise, allowing you to achieve more gain and stronger direct sound. The built-in pop protection utilizes three separate layers to minimize noise from vocal plosives, breaths, and even light wind. Internal shock-mounting helps to decouple the mic from sources of vibration that could otherwise transfer from the mic body to the capsule. Being a solid-state XLR condenser mic, the KSM32/CG requires 48V phantom power.Class-A Output StageClass-A transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency rangeExtended Low-Frequency ResponseEmbossed, high-compliance diaphragm provides extended low-frequency responseExcellent Transient ResponseUltra-thin, 2.5 ¦Ìm, gold-layered, low-mass, Mylar diaphragm for excellent transient response-15 dB Pad-15 dB attenuation switch for handling extremely high sound pressure levels (SPL)Low-Cut FilterSwitchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect3-Stage Pop FilterIntegrated 3-stage pop protection grille reduces “pop” and other breath noiseInternal ShockmountInternal shockmount reduces transmission of handling noiseAccessoriesIncludes ShureLock stand mount and zippered storage bagWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 042406065948
Shure KSM32 SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, Acoustic Guitar, Acoustic Bass, Piano, Drums, Percussion, Overhead, Brass, Woodwinds, Room AmbianceSound FieldMonoOperating PrinciplePressure GradientCapsule1 x CondenserPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePad-15 dBHigh-Pass Filter80 Hz, 18 dB/Octave 115 Hz, 6 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, PadWindscreenBuilt-InPerformanceFrequency Range20 Hz to 20 kHz Maximum SPL154 dB SPL (2.5-Kilohms Load, with Pad)139 dB SPL (2.5-Kilohms Load)148 dB SPL (1-Kilohm Load, with Pad)133 dB SPL (1-Kilohm Load)Impedance150 OhmsSensitivity-36 dBV/Pa at 1 kHz (Open Circuit Voltage)Output Level9 dBV (Max)Dynamic Range126 dB (1 kHz, 2.5-Kilohms Load)119 dB (1 kHz, 1-Kilohm Load)Signal-to-Noise Ratio81 dB A-WeightedEquivalent Noise Level13 dB A-WeightedTHD< 0.08% CMRR50 dBConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage11 to 52 V (Phantom Power)Operating Current Consumption4.7 mAPhysicalColorGrayMountingMic Clip/Stand Adapter (Included)Included CaseZipper PouchIncluded FiltersNoneDimensions?: 2.2 x L: 7.37" / ?: 5.6 x L: 18.72?cmWeight17.3?oz / 490.46?gPackaging InfoPackage Weight2.34 lbBox Dimensions (LxWxH)10.15 x 5.45 x 4"S
