Introducing Polsen’s RM-Series Large-Diaphragm Condenser MicrophonesThe orange RM-650 Large Diaphragm Condenser Microphone from Polsen is a go-to choice for broadcast and podcast projects, as well as voiceovers. The stylish and eye-catching microphone features a large and highly sensitive one-inch gold-plated diaphragm that captures vocals and instruments with detailed accuracy. The high SPL capacity, low noise, and wide dynamic range meet the demands for a clear and natural sound for both professional and project studios applications.If you’re working in an acoustically untreated room or performing on-stage, the RM-650’s cardioid polar pattern picks up sound directly in front of the microphone while it rejects off-axis sound to help eliminate noise. To further ensure clean vocals, the RM-650 includes a shockmount to eliminate vibrations, a customized metal mesh pop screen to minimize disruptive vocal plosives, a reducer bushing to fit any mic stand, and a carrying case to protect the mic during transport and storage.Pro and Project StudiosWhether you record in a professional or project studio or at home, the RM-650 sets up quickly and offers a rich and natural sound for your broadcasts, podcasts, or vocals. It also sounds great on guitar.Large Gold-Plated DiaphragmThere’s no better choice than a large-diaphragm condenser microphone to deliver warm and natural audio. The RM-650’s one-inch diaphragm captures lush and rich tones that make your voice sound great. Gold plating enhances the diaphragm’s conductivity for a better frequency response and provides a wide and accurate sound.Wide Frequency ResponseThe RM-650’s wide frequency response translates into the RM-650’s ability to accurately capture the full character and nuances of a voice or an instrument.High SPLIf you’re a singer, the RM-650 can handle very-high SPL. You won’t have to step back from the microphone and risk losing some of those wonderful lower frequencies that add richness to your vocals.Custom Shock MountThere’s no telling what noise your mic’s going to pick up until you plug it in. In acoustically untreated rooms, even minute vibrations can travel up the mic stand and create noise. The custom low-profile shockmount cradles the base of the microphone and eliminates the noise from those unwanted vibrations.Customized Pop ScreenThe custom pop screen minimizes the vocal pops from p and b sounds and ensures all vocal tracks aren’t littered with plosives.Stylish DesignThe rugged aluminum alloy body is capable of withstanding travel and the rigors of daily use on the road. The stylish design, form, and color give the RM-650 offers a little flair and attention.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628013841
Neat Microphones Worker Bee II SpecsMicrophonePrimary ApplicationsStudio RecordingForm FactorStand/Boom MountIntended Sound SourcesVocals, Acoustic Guitar, Electric Guitar, Drums, Percussion, Instrument, BrassSound FieldMonoOperating PrinciplePressure GradientCapsuleElectret CondenserDiaphragm1.0″ / 25?mmPolar PatternCardioidOrientationSide AddressCircuitrySolid-StatePadNoneHigh-Pass FilterNoneTone AdjustmentNoneGain AdjustmentNoneOn-Board ControlsNoneWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL145 dB SPL (.5% THD, 2.5-Kilohms Load)Impedance50 OhmsLoad Impedance> 1000 OhmsSensitivity19 mV/Pa at 1 kHzDynamic Range134 dB A-Weighted (2.5-Kilohms Load)Signal-to-Noise Ratio83 dB A-WeightedEquivalent Noise Level11 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerOperating Voltage48 V (Phantom Power)PhysicalColorBlackMountingBoom, Floor Mic Stand (via Integrated Hardware)Mounting Thread SizeNot Specified by ManufacturerIncluded CaseNoneIncluded FiltersNoneDimensions?: 3 x H: 6.25″ / ?: 7.6 x H: 15.88?cmWeight0.93?lb / 422?gPackaging InfoPackage Weight1.71 lbBox Dimensions (LxWxH)10 x 5 x 5″S
