Presented in a non-reflective, black, rubberized finish to keep out the spotlight, the sE Electronics sE4400a Factory-Matched Pair is a pair of large-diaphragm condenser microphones boasting four selectable polar patterns, handcrafted brass capsules, and onboard pad and filter settings. Paired with a highly adaptable shockmount, the sE4400a offers the sonic and physical flexibility to handle all kinds of sound sources and mic positions. Plus, it comes with a mounting bar for precise stereo configurations and a hard shell flight case to keep the whole setup safe during storage and transport. The sE4400a’s handmade vintage-style capsules yield not only a warm tone, but also the versatility of four polar patterns¡ªcardioid, hypercardioid, figure-8, and omnidirectional¡ªto enable anything from front-focused pickup to 360¡ã capture. The -10 and -20 dB pads are perfect for preventing distortion when miking excessively loud instruments, and the low-cut filters (60 or 120 Hz) let you keep bass buildup under control. Since the sE4400a utilizes solid-state circuitry and a balanced XLR output, it should be connected to a mic preamp that can supply 48V phantom power.Vintage VersatilityWith four polar patterns, a vintage-style brass capsule, two low-cut filters, two pads, and a highly adaptable shockmount, the sE4400a is destined to be a classic. Like the classics, the sE4400a is made to sound great on everything¡ªvocals, guitars, toms, overheads, classical pianos, strings, you name it.Handcrafted CapsulesAs with all sE mics, the sE4400a’s back-to-back brass-ringed capsules are hand-built and hand-tuned by skilled sE technicians, just like any fine musical instrument.Custom Shockmount and ChassisThe flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed inside of a kick drum. At less than 3/4″ thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.Non-Reflective PaintThe mic has a special, black, non-reflective, non-marking, rubberized finish which is ideal for live stage, theatre, TV, and broadcast applications that require lighting.Two PadsThe -10 and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments.Two Low-Cut FiltersSelectable at either 60 or 120 Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise as well as help compensate for excessive bass (proximity effect) with close-mic techniques.Connects to XLR Mic InputsThe sE4400A is equipped with a balanced XLR 3-pin output for connection to audio interfaces, outboard mic preamps, or mixer channels. 48V phantom power is required.Factory-Matched PairWhen purchased as a pair, the capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo image. This configuration also includes a precision stereo mounting bar and two of the sE4400a’s custom shockmounts. The whole setup comes packaged inside a secure flight case.WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 850426001460
sE Electronics sE4400a SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1.3″ / 32?mmPolar PatternCardioid, Figure-8, Hypercardioid, OmnidirectionalPattern SelectionSwitched (Adjustable on Mic)OrientationSide AddressCircuitrySolid-StatePad-10 dB-20 dBHigh-Pass Filter60 Hz 120 Hz Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, Pad, Polar PatternWindscreenNonePerformanceFrequency Range20 Hz to 20 kHz Maximum SPL122 dB SPL (1 kHz, .5% THD)132 dB SPL (1 kHz, .5% THD, with Pad)142 dB SPL (1 kHz, .5% THD, with Pad)Impedance50 OhmsSensitivity-32 dBSignal-to-Noise Ratio78 dB Equivalent Noise Level16 dB A-WeightedConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage48 V (Phantom Power)PhysicalColorBlackMountingShockmount (Included)Included CaseHard CaseIncluded FiltersNoneWeight9.88?oz / 280?gPackaging InfoPackage Weight8.05 lbBox Dimensions (LxWxH)14.1 x 10.9 x 5.8″S
