Featuring integral pop protection and shock-mounting plus a multipattern true condenser capsule and transparent Class-A circuitry with ultralow self-noise, the Shure KSM44A/SL large-diaphragm microphone is built to deliver excellent transient response, neutral tone, and the flexibility to handle most sound sources and mic configurations. Its flat frequency response and selectable settings¡ªtwo low-cut filter options and a -15 dB pad¡ªmake the KSM44A/SL honest and versatile, so it can be used on anything from vocals and guitars to drums and piano.
The cardioid, omnidirectional, and figure-8 polar patterns of the KSM44A/SL allow it work optimally as a close mic, room mic, or single mic for multiple instruments. The built-in pop protection utilizes three separate layers to minimize noise from vocal plosives, breaths, and even light wind. Internal shock-mounting helps to decouple the mic from sources of vibration that could otherwise transfer from the mic body to the capsule. Being a solid-state XLR condenser mic, the KSM44A/SL requires 48V phantom power. Since it comes with a ShureLock shockmount, ShureLock swivel adapter, velveteen pouch, and hard shell carrying case, it is equally ready for the studio and the stage.Prethos Advanced Preamplifier TechnologyClass-A, discrete, transformerless preamplifier for transparency, extremely wide frequency response, and no crossover distortion, minimizing harmonic and intermodulation distortionsImpressive Performance4 dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB (measured in cardioid mode with the pad off)Three Polar PatternsMultiple polar patterns including cardioid (picks up sounds directly in front of the mic and is least sensitive to those in back), omnidirectional (picks up sounds from all directions), and figure-8 (picks up equally from the front and back of the mic while rejecting sounds from the sides) for flexibility in a wide variety of recording applicationsExcellent Transient ResponseDual, 1″ externally biased, ultra-thin, 2.5 ¦Ìm, 24kt gold-layered, low-mass diaphragms provide superior transient responseSubsonic FilterSubsonic filter eliminates rumble from mechanical vibration below 17 Hz-15 dB PadSwitchable -15 dB pad for handling extremely high sound pressure levels (SPL)Low-Cut Filters3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect3-Stage Pop FilterIntegrated 3-stage pop protection grille reduces plosives and other breath noiseInternal ShockmountInternal shockmount reduces transmission of handling noiseAccessoriesIncludes ShureLock Cristal elastic shockmount, ShureLock Cristal swivel adapter, velveteen mic pouch, and hard shell carrying caseWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 042406186391
Shure KSM44A SpecsMicrophonePrimary ApplicationsLive Sound, Studio RecordingForm FactorLarge Diaphragm Mic / Stand/Boom MountIntended Sound SourcesVocals, InstrumentSound FieldMonoOperating PrinciplePressure GradientCapsuleCondenserDiaphragm1″ / 25.40?mmPolar PatternCardioid, Figure-8, OmnidirectionalPattern SelectionSwitched (Adjustable on Mic)OrientationSide AddressCircuitrySolid-StatePad-15 dBHigh-Pass Filter115 Hz, 6 dB/Octave 80 Hz, 18 dB/Octave Tone AdjustmentNoneGain AdjustmentNoneIndicatorsNoneOn-Board ControlsHigh-Pass Filter, Pad, Polar PatternWindscreenBuilt-InPerformanceFrequency Range20 Hz to 20 kHz Maximum SPLCardioid: 134 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load)Cardioid: 131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)Cardioid: 150 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load, with Pad)Cardioid: 147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)Omnidirectional: 140 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load)Omnidirectional: 137 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)Omnidirectional: 152 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load, with Pad)Omnidirectional: 149 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)Figure-8: 139 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load)Figure-8: 136 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)Figure-8: 151 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load, with Pad)Figure-8: 148 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)Impedance50 OhmsLoad Impedance¡Ý 1000 OhmsSensitivityCardioid: -31 dBV/Pa at 1 kHz (Open Circuit Voltage)Omnidirectional: -37 dBV/Pa at 1 kHz (Open Circuit Voltage)Figure-8: -36 dBV/Pa at 1 kHz (Open Circuit Voltage)Output Level9 dBV (Max)Dynamic RangeCardioid: 130 dB (1 kHz, 2.5-Kilohms Load)127 dB (1 kHz, 1-Kilohm Load)Omnidirectional: 134 dB (1 kHz, 2.5-Kilohms Load)131 dB (1 kHz, 1-Kilohm Load)Figure-8: 131 dB (1 kHz, 2.5-Kilohms Load)128 dB (1 kHz, 1-Kilohm Load)Signal-to-Noise RatioCardioid: 90 dB A-WeightedOmnidirectional: 88 dB A-WeightedFigure-8: 86.5 dB A-WeightedEquivalent Noise LevelCardioid: 4 dB SPL A-Weighted (Typical)Omnidirectional: 6 dB SPL A-Weighted (Typical)Figure-8: 7.5 dB SPL A-Weighted (Typical)CMRR50 dBConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)Headphone ConnectorNonePowerBus PowerNoneOperating Voltage11 to 52 V (Phantom Power)Operating Current Consumption5.8 mAPhysicalColorSilverMountingMic Clip/Stand Adapter, Shockmount (Included)Included CaseHard Case, Mic SockIncluded FiltersNoneDimensions?: 2.2 x L: 7.37″ / ?: 5.6 x L: 18.72?cmWeight1.08?lb / 0.49?kgPackaging InfoPackage Weight5.4 lbBox Dimensions (LxWxH)14.3 x 10.5 x 6.4″S
