The Thronmax Mdrill Zone is an analog, small-diaphragm condenser microphone with a 3-pin XLR connection. It employes Thronmax’s VERTIGAIN technology to help increase fidelity by forcing soundwaves to move in a vertical direction. This is a cardioid microphone, focusing audio capture on what’s in front of the mic. Its 25mm capsule allows you to capture a frequency response of 25 Hz to 20 kHz. With its warm tone and clear top in, the mic is suitable for vocals, acoustic guitars, and voiceover work. Use the high-pass filter to filter off low-end rumble below 150 Hz if need be. It requires 48V phantom power to operate. The Mdrill Zone includes a shockmount.
THRONMAX Mdrill Zone SpecsMicrophoneForm FactorStand/Boom MountSound FieldMonoCapsule1 x CondenserDiaphragm0.98″ / 25?mmPolar PatternCardioidCircuitrySolid-StatePad-10 dBHigh-Pass Filter150 Hz, 6 dB/Octave On-Board ControlsHigh-Pass FilterPerformanceFrequency Range25 Hz to 20 kHz Impedance150 OhmsSensitivity15 mV/PaConnectivityOutput Connectors (Analog)1 x XLR 3-Pin Male (on Mic)PowerOperating Voltage48 V (Phantom Power)PhysicalColorBlackMountingShockmount (Included)Packaging InfoPackage Weight2.135 lbBox Dimensions (LxWxH)9.7 x 8.3 x 2.9″S