Exclusively from UNCUCO, this complete broadcast microphone kit is compiled around the Rode Broadcaster broadcast microphone. A foam windscreen and a broadcast arm with an integrated XLR cable are included. The kit eliminates the guess work involved in accessorizing a broadcast microphone for radio booths, voice-over studios, etc.Rode Broadcaster Large-Diaphragm Cardioid Condenser MicrophoneGive your voice a rich, full, radio-ready sound with the Rode Broadcaster, a large-diaphragm condenser microphone designed specifically for broadcast, voice-over, radio, and podcast applications. The 1″ gold-plated capsule, low-noise circuitry, and pronounced proximity effect work together to deliver a warm and robust tone worthy of pro-level productions. Plus, the mic’s cardioid polar pattern naturally rejects sound behind the mic, picking up less background noise than many other polar responses.
Following broadcast tradition, it is an end-address mic with a clip that works with stands or boom arms (available separately). Unlike most mics, it has a special LED that can be used for “On-Air” indication when properly wired to a compatible console. Whereas many mics require an external screen to inhibit jarring “p” and “b” sounds, the Broadcaster has an internal pop filter designed to control such plosives. Being a true condenser mic, the Broadcaster should be connected via an XLR mic cable (available separately) to a mixer channel, mic preamp, or audio device that can supply phantom power.For Radio, Broadcasts, and PodcastsThe Broadcaster is a large-diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications. Its rich, full-quality tailored response has an emphasized proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a podcast mic or a voice-over microphone for film and television.Internal Pop FilterThe Broadcaster features an internal pop filter, designed to minimize vocal plosive sounds that can overload the microphone capsule and distort the audio output.High-Pass FilterIn addition to the Broadcaster’s native 20 Hz to 20 kHz response, a selectable high-pass (low-cut) filter at 75 Hz is available to prevent low-end noise such as air conditioners and traffic from being recorded.On-Air IndicatorThe Broadcaster features an innovative “On-Air” indicator on the body that can be wired for external activation by the “Channel On/Mute” function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.Features at a GlanceClassic broadcaster-style, end-address micEmphasized proximity effect for robust vocal soundCardioid polar pattern reduces background noiseHF2 1″ capsule with gold-plated diaphragmInternal pop filter reduces plosivesLED for power status or “On-Air” indicationLow-noise JFET circuitrySwitchable voice-tailored 75 Hz low-cut filterRugged stainless steel bodyXLR 3-pin output connectorOperates on phantom power (24 or 48 VDC)Includes mic clip and zipper pouchWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 698813000357Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR CableThe Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It’s ideal for broadcast, voiceover, and podcasts. The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8″-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360¡ã, the BAI-2X allows for precise microphone placement. The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3″ thick. The C-clamp’s slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14″ riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.VersatileIdeal for studios as well as home useInternal SpringsInternal springs provide smooth, noise-free positioning and clean and sleek profileSturdySupports microphones up to 5 lb / 2.27kgCompatibilityThe 5/8″-27 standard microphone thread is compatible with most shockmounts and microphone clipsPrecisionExtends up to 40″ / 101.6cm and rotates 360¡ã allowing for precise microphone placementXLR CableThe integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transferExtra HeightA 14″ / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitorsCombo MountThe heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3″ / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws14″ RiserThe included riser adds 14″ / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitorsWhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628578272Auray WCF-UB440 Foam Windscreen for Large-Diaphragm Condenser MicsThe Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high-frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high-frequency dampening is a worthwhile exchange for the notable wind noise reduction.The WCF-UB440’s foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen has a height of 3.5″ and is designed to fit over the Senal UB-440 as well as mics from AKG, Shure, Neumann, Mi-Tek, MXL, Behringer, SE Electronic, Rode, and most other large diaphragm condensers with a grille diameter larger than 2″.The WCF-UB440 Foam Windscreen for the Senal UB-440 is an effective solution for basic wind protection.Fits These and Other Similar-Sized Microphones:AKG 414, 420, C2000, 220, 120Shure KSM44A, KSM32/SL, SM27, PG42Senal UB-440Neumann U87, 103Rode NTK, NT1000, NT100, NT1WhatsApp:+8615989288128 , UNCUCO Radio / TV Studio Equipment. , 847628569867
